Acoustic Eigenmode Analysis for Swirling Flows in Ducts Huang Huang (2017), DOI:
Numerical investigation of inlet acoustic liner optimization based on response surface model Jun Xu, Yao Xu, Changchun Liu, Lijuan Feng, Jun Chen (2017), DOI:
Numerical Investigation of Noise Characteristics for the Vortex-induced Vibration of a Circular Cylinder Long Cheng, Lin Du, Xiaofeng Sun (2017), DOI:
Preliminary parametric study on dissipative non-locally reacting liner in circular duct for absorbing higher-order duct modes Lingfeng Chen, Xiaoyu Wang, Xiaofeng Sun (2017), DOI:
A Study on Component Matching Method of Turbofan Engine with a Flow Characteristic Model Hualei Li, Zhiyong Tan, Yudong Wang, Hongyu Tang, Bingjing Xue (2017), DOI:
On The Off-Design Performance Of Supercritical Carbon Dioxide Power Cycles Ingo H J Jahn, Joshua A Keep (2017), DOI:
Reducing Levelised Cost of Energy and Environmental Impact of a Hybrid Microturbine-based Concentrated Solar Power Plant Davide Iaria, Jafar Al Zaili, Abdulnaser Sayma (2017), DOI:
Simulation Study On Steam-Injected Micro Gas Turbine Xin Zhou, Gang Xiao, Jinli Chen, Huanlei Liu, Mingjiang Ni (2017), DOI:
Numerical Simulation of a Novel Rotary Engine Compared to Conventional Reciprocating Engine Cycle Vasilis G. Gkoutzamanis, Savvas Savvakis, Anestis I. Kalfas (2017), DOI:
Efficient LES Evaluation of Various Complex Unsteady Flow Configurations in a Design Space Mai Zhang, Li He (2017), DOI:
Implementation and application of a GPU-based finite volume LES solver Hongbin Liu, Jinlan Gou, Xinrong Su, Xin Yuan (2017), DOI:
The Impact of Numerical Schemes On Flow Separation Capturing of A Linear Compressor Cascade Using DES Method Ruiyu Li, Limin Gao, Lei Zhao, Zeyu Yang (2017), DOI:
Stress and deformation analysis of the turbine in liquid rocket engine using fluid-thermal-structure coupling method Yang Liu, Yuan Qi, Qingce Shi, Zhiduo Wang, Zhenping Feng (2017), DOI:
The development of a hyperbolic RANS system for analysing turbomachinery flow field Long Cheng, Lin Du, Xiaofeng Sun (2017), DOI:
High-Order Simulation Of Turbomachinery Flow Using A Discontinuous Galerkin Method M. Yao, L. He (2017), DOI:
Influence of Endwall Aspiration on Aerodynamic Performance in Compound Lean Compressor Cascade Ding Jun, Zhu Wei, Cai Le, Zhou Xun, Wang Songtao, Wang Zhongqi (2017), DOI:
The Impact of Uncertain Stagger Angle Variation on High-Pressure Compressor Rotor Performance Siyu Zheng, Jinfang Teng, Lin Fan, Xiaoqing Qiang (2017), DOI:
Numerical Investigation of Passive Corner Separation Control Using a Micro-blade in an Annular Compressor Cascade Bo Wang, Yanhui Wu, Ruijing Xiong, Zihan Lei, Liang Tian (2017), DOI:
Evaluation And Prediction Of The Effectiveness Of Slot-Type Casing Treatments In A Large-Scale Axial Compressor By An Integral Method Xi Nan, Ning Ma, Feng Lin, Takehiro Himeno, Toshinori Watanabe (2017), DOI:
Numerical Analysis of Humidity Effects on Transonic Compressor Cascade Aerodynamic Characteristics Jaemin Rhee, Jinwook Kim, Juhyun Im, Seung Jin Song (2017), DOI:
Design and Experiment Test of a 2.5-Stage Highly Loaded Axial Compressor Yang Chengwu, Zhao Shengfeng, Han Ge, Lu Xingen, Zhang Yanfeng (2017), DOI:
A Kinetics Study on the NOx Emissions of Axially Staged Combustion System for Gas Turbine Applications Wenkai Qian, Min Zhu, Suhui Li (2017), DOI:
Numerical Analysis on Fuel-Air Mixing in premixed nozzle of micro gas turbine Hongzhao Liu, Yuzhang Wang, Shilie Weng (2017), DOI:
Numerical Modeling of CO-Emissions for Gas Turbine Combustors Operating at Part-Load Conditions Noah Klarmann, Benjamin Timo Zoller, Thomas Sattelmayer (2017), DOI:
Study on the shape of liquid film formed by the wall-impingement jet Xiang Feng, Yong Huang, Ruixiang Wang, Di Wang (2017), DOI:
The mechanism analyses of key factors affecting operation range of a stratified partial premixed combustor Cunxi Liu, Haowei Wu, Jinhu Yang, Fuqiang Liu, Yong Mu, Chunyan Hu, Gang Xu (2017), DOI:
Experimental Study of the Effect of the Main Stage Stratifier Length on Flow Field and LBO Performance for a Lean Staged Injector Jinhu Yang, Haowei Wu, Cunxi Liu, Fuqiang Liu, Yong Mu, Gang Xu (2017), DOI:
Sequential Combustion Technology in Ansaldo\'s GT26 and GT36 U. Ruedel, K. Knapp, S. Florjancic (2017), DOI:
The Influence of Hydrogen on the Combustion Characteristics of Lean Premix Swirl CH4/H2 Flames Liu Xiaopei, Chen Mingmin, Duan Dongxia, Zhang Hongwu, Enrico Gottardo (2017), DOI:
Towards lower emission- numerical investigation of flameless combustion in the trapped vortex-inter-stage combustor Kaili Zhang, Fei Xing, Shining Chan, Yue Huang, Jiangqian Cai (2017), DOI:
A Physics Based Reactor Network Model of RQL Combustors Qian Shen, Yue Huang, Fei Xing, Han Peng, Zhiwei Lin (2017), DOI:
Design and Analysis of a High Pressure Ratio Centrifugal Compressor with Three Diffusers Ge Han, Lei Guo, Ziliang Li, Chengwu Yang, Shengfeng Zhao, Xingen Lu (2017), DOI:
The Secondary Flow Loss Reduction Mechanism Investigation In A Turbine Cascade With Aerodynamic Optimization Design Nonaxisymmetric Endwall Hao Liu, Liangliang Liu, Xin Shen, Xiaocheng Zhu, Hong Yang, Zhaohui Du (2017), DOI:
Aerodynamic Design Optimization of a 200 kW-class Radial Inflow Supercritical Carbon Dioxide Turbine Can Ma, Jun Wu, Zhouyang Liu, Yuansheng Lin (2017), DOI:
Structure optimization of an engine disk in fatigue test based on combined-stress factor method Jin Meng, Z.Q. Fan, Z.Y Yuan, F.S. Wang, Jia Li (2017), DOI:
Design of Non-Axisymmetric Turbine Endwall: Computational Study Liu Chen, Ren Dai, Chengxiong Pan, Meibao Zhang (2017), DOI:
Numerical Study Of The Flow Through A Highly-Loaded Compressor Cascade With Jet Flap Yiwen Li, Juan Du, Jichao Li, Qianfeng Zhang, Hongwu Zhang (2017), DOI:
Vortex transportation in an Intermediate Turbine Duct Fan Dong, Chao Zhou (2017), DOI:
Interactive Effect Between Rotating Drum Orifice And Tubed Vortex Reducer On Flow Resistance Characteristics Of Secondary Air Sub-System Yabo Xue, Xiao Chen, Lijun Wu, Xiuxiu Chen (2017), DOI:
Flow Characteristics In The Air Bleeding Manifold Teng Jin-fang * He Pan, Wu Dong-run, Gu Wei, Qiang Xiao-qing (2017), DOI:
Correlation between Total Pressure Losses of Highly Loaded Annular Diffusers and Integral Stage Design Parameters Dajan Mimic, Christoph Jätz (2017), DOI:
A Combined Numerical and Experimental Investigation of Flow Characteristics in a Rotor-Stator Cavity with Radial Inflow Liu Guang, Du Qiang, Wang Pei, Liu Jun, Zhu JunQiang (2017), DOI:
Natural Cooling Thermal Analysis of the High Pressure Rotor of an Aero Engine: a Preliminary Study Chen Shaojie, Gu Wei, Sui Dongyu, Wang Le (2017), DOI:
Experimental Investigation of Heat Transfer Characteristics in Jet Impingement Cooling System with Pin Fins and Film Cooling Extraction Yu Rao, Yuyang Liu (2017), DOI:
Experimental Investigation of Blade Leading Edge Jet Impingement with Varying Jet Nozzle Positions Liangliang Liu, Hao Liu, Xiaocheng Zhu, Zhaohui Du (2017), DOI:
Experimental and numerical investigation of heat transfer for an obliquely impingement Min Ren, Xunfeng Lu, Jing Ren, Hongde Jiang (2017), DOI:
Influences of Different Microstructural Thermal Barrier Coatings on Conjugate Heat Transfer Coefficient of Turbine Blade Surface Yuzhang Wang, Yun Long, Jiali Li, Yiwu Weng (2017), DOI:
Upstream Wakes Effect on Heat Transfer of Endwall of Turbine Blade with Relative Position of Cylindrical Rod Seok Min Choi, Junsoo Kim, Minho Bang, Eui Yeop Jung, HeeKoo Moon, Hyung Hee Cho (2017), DOI:
A Numerical Study of Heat Transfer Characteristics of S-CO2 Impinging Jet for Direct Fired Oxy-Fuel S-CO2 Turbine Seon Ho Kim, Namkyu Lee, Hwanseong Lee, Minho Bang, Hyung Hee Cho (2017), DOI:
Experimental Investigation and Numerical Analysis on Heat Transfer of a Nozzle Guide Vane Endwall at Engine Representative Reynolds and Mach Numbers Xing Yang, Zhansheng Liu, Qiang Zhao, Zhao Liu, Zhenping Feng (2017), DOI:
Experimental Evidence Of Temperature Ratio Effect On Turbine Blade Tip Heat Transfer H. Jiang, Q. Zhang, L. He, S. Lu, L. Wang, J. Teng (2017), DOI:
Conjugate Heat Transfer Analysis on Plate Fin Surface Air Cooled Oil Cooler Yasunori Sakuma, Hiroto Saito, Toshinori Watanabe, Takehiro Himeno, Chihiro Inoue, Susumu Tomida, Norio Takahashi (2017), DOI:
Effects of Rotation on Film Cooling Effectiveness of a Gas Turbine Rotor Blade With Cylindrical and Fan-shaped Film Holes YU Zhi-Qiang, LIU Jian-Jun (2017), DOI:
Effects Of Slot Position And Coolant Incidence Angle On The Cooling Performance Of Vane Endwall Xu Qingzong, Wang Pei, Du Qiang, Zhu Junqiang, Liu Guang (2017), DOI:
The effect of impeller resonance by mistuning blade of centrifugal compressor Sung Hyen Hwang, Young Joo Kim, Chan Sun Lim (2017), DOI:
Investigation on microstructure and mechanical behavior of one wrought nickel based superalloy obtained by Selective laser melting process Hongqi Zhang, Enxiang FAN, Chao Wang, Lei He, Wenjun Liao (2017), DOI:
Investigation of dwell time effects on the creep-fatigue-interaction behavior of a 1000 MW steam turbine rotor using a continuum damage mechanics-based viscoplastic model Weizhe Wang, Yingzheng Liu (2017), DOI:
Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning Lukas Schwerdt, Lars Panning-von Scheidt, Jörg Wallaschek, Ricarda Berger, Raimund Rolfes, Christian Keller, Jörg Seume (2017), DOI:
Case Study On The Subsynchronous Vibration By External Forces In Integrally Geared Centrifugal Compressor Seunghoon Shin, Kyungdae Kang, Taewook Lee, Chansun Lim (2017), DOI:
The research about influence of wet steam on overspeed for Nuclear Steam Turbine Kangna SUN (2017), DOI:
Designing Steam Turbine Exhaust Diffusers Using Minimum Energy Curves Bowen Ding, Liping Xu (2017), DOI:
Numerical simulation of homogeneous condensing wet-steam flow using an Euler-Lagrangian method Byeongyeob Choi, Jeongbo Shim, Changhyun Kim, Jaehyeon Park, Donghyun You, Jehyun Baek (2017), DOI:
Effect of Stator Rub Grooves on Leakage Performance of a Stepped Labyrinth Seal Kang Zhang, Xinbo Dai, Xin Yan, Jun Li (2017), DOI:
Loss Mechanism and Assessment in Mixing Between Main Flow and Coolant Jets with DDES Simulation Zhen Zhang, Xin Yuan, Xinrong Su (2017), DOI:
Thermal stress evaluation for high temperature Turbine Rotor Using Green\'s Function Haitao Wang, Feng Liang, Wenxiang Hua, Yan Liu, Qinghua Huang, Guoping Shen (2017), DOI:
Effects of Blade Lean together with Blade Clocking on the Overall Performance of a Multi-Stage Turbine Yalu Zhu, Jiaqi Luo, Feng Liu (2017), DOI:
Investigation of Characteristics of Turbulence Boundary Layer at Mid-span in a Linear Compressor Cascade Luo Xiaotian, Teng Jinfang, Ma Wei (2017), DOI:
Comparison of Different Frequency Domain Methods for Efficient Analysis of Temporal Periodic Flow Filed Hangkong Wu, Dingxi Wang (2017), DOI:
Numerical Prediction of Unsteady Endwall Flow and Heat Transfer with Oncoming wake Yu Ban, Ren Dai, Zhang Meibao, Pan Chengxiong (2017), DOI:
Fourier Transformation Based Rotor-Stator Coupling Method for Time Domain Analysis of Turbomachinery Unsteady Flows Dingxi Wang, Xiuquan Huang (2017), DOI:
Influence of the Inlet Distortion on Fan Stall Margin at Different Rotation Speeds Wenqiang Zhang, Mehdi Vahdati (2017), DOI:
A Novel 4-sensor Fast-Response Aerodynamic Probe for Non-Isotropic Turbulence Measurement in Turbomachinery Flows Alexandros C. Chasoglou, Michel Mansour, Anestis I. Kalfas, Reza S. Abhari (2017), DOI:
Numerical Analysis Of Instabilities For A Low Speed Fan Blade Kuen-Bae Lee, Mark Wilson, Mehdi Vahdati (2017), DOI: