Advanced Cycles & Applications
Performance Analysis and Parametric Optimization of Supercritical Carbon Dioxide Cycle with Bottoming Organic Rankine Cycle Aozheng Zhou, Xiaodong Ren, Xuesong Li, Chunwei Gu (2019), DOI: 10.33737/gpps19-tc-001
CFD Analysis of a Turbo Expander Stator for Non-Conventional Fluids Konstantinos Ntatsis, Anastasia Chatziangelidou, Theofilos Efstathiadis, Vasilis Gkoutzamanis, Anestis Kalfas, Paolo Silvestri (2019), DOI: 10.33737/gpps19-tc-089
Thermal Energy Storage for Gas Turbine Power Augmentation Vasilis Gkoutzamanis, Anastasia Chatziangelidou, Theofilos Efstathiadis, Anestis Kalfas, Alberto Traverso, Justin Chiu (2019), DOI: 10.33737/gpps19-tc-072
Optimization of an ORC Turbine Stator Under Turbulence Uncertainty Nassim Razaaly, Giulio Gori, Gianluca Iaccarinoc, Pietro Marco Congedo (2019), DOI: 10.33737/gpps19-tc-090
Axial Compressors
Influence of Blade Aspect Ratio on Axial Compressor Efficiency Markus Peters, Tobias Schmidt, Peter Jeschke (2019), DOI: 10.33737/gpps19-tc-039
Numerical Investigation of Wall Heating/Cooling Effect on the Transonic Compressor Performance Long-gang Liu, Xue-song Li, Xiao-dong Ren, Chun-wei Gu (2019), DOI: 10.33737/gpps19-tc-029
Unsteadiness of Tip Leakage Flow in the Detached-Eddy Simulation on a Transonic Compressor Rotor Xiangyu Su, Xuesong Li, Xiaodong Ren, Chunwei Gu (2019), DOI: 10.33737/gpps19-tc-030
Combustion
Superior Fuel and Operational Flexibility of Sequential Combustion in Ansaldo Energia Gas Turbines Andrea Ciani, Mirko Bothien, Birute Bunkute, John Wood, Gerhard Früchtel (2019), DOI: 10.33737/gpps19-tc-032
Planar LIF/Mie Ratio Droplet Sizing Using Structured Laser Sheet Imaging at Elevated Ambient Pressures Andrew Corber, Wajid Chishty, Patrizio Vena (2019), DOI: 10.33737/gpps19-tc-048
Numerical Simulation of Gas Turbine Burning Chamber Combustion with Defined Burner Defects Christoph Hennecke, Henrik von der Haar, Friedrich Dinkelacker (2019), DOI: 10.33737/gpps19-tc-088
Bifurcation Dodge: Avoidance of a Thermoacoustic Instability under Transient Operation Giacomo Bonciolini, Nicolas Noiray and (2019), DOI: 10.33737/gpps19-tc-091
Cooling Technology & Heat Transfer
Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades Marlene Böttger, Martin Lange, Ronald Mailach, Konrad Vogeler (2019), DOI: 10.33737/gpps19-tc-019
Numerical Investigation of Heat Transfer in the Near-Critical Point Applications Setareh Nakhostin, Alireza Ameli, Teemu Turunen-Saaresti (2019), DOI: 10.33737/gpps19-tc-008
Purge Flow Effects on Rotor Hub Endwall Heat Transfer with Extended {EndwallContouring} into the Disk Cavity Dominic D. Hänni, Reza S. Abhari, Rainer Schädler, Anestis I. Kalfas, Gregor Schmid, Ewald Lutum, Nicolas Lecoq (2019), DOI: 10.33737/gpps19-tc-014
Ducts & Nozzles
Atmospheric Crosswind Tests of Aspirated Jet Engine Intake Models Jan-Hendrik Krone, Lennart Harjes, Philip Frantzheld, Patrick Koch, Daniel Giesecke, Jens Friedrichs (2019), DOI: 10.33737/gpps19-tc-018
Instrumentation & Testing
Dynamic Coefficient Identification from Experiments: the Effects of Measuring Hydrodynamic Forces Vs. Applied Forces Benstone Schwartz, Roger Fittro, Carl Knospe (2019), DOI: 10.33737/gpps19-tc-020
Oil & Gas
Impact of Trends in Global {LNG} Supply and Demand on the European Gas Market in 2030 Patrick Eser, Ndaona Chokani, Reza Abhari (2019), DOI: 10.33737/gpps19-tc-050
Radial Compressors
Computational and Experimental Investigation of Mechanical Stresses Induced by Rotor-Stator Interaction in an Industrial Centrifugal Compressor Holger Franz, Sebastian Legrand, Tobias Wiedemann (2019), DOI: 10.33737/gpps19-tc-055
Conjugate Heat Transfer Study of a Centrifugal Compressor with Impeller Cavities Maurice Stahl, Dr.-Ing. Holger Franz, Dr.-Ing. Lutz Ittern (2019), DOI: 10.33737/gpps19-tc-054
Measurement of Shrouded Radial Compressor Stability under Eccentric Conditions Suyong Kim, Jieun Song, Tae Choon Park, Kilyoung Kim, Seung Jin Song (2019), DOI: 10.33737/gpps19-tc-068
Real Gas Effects on the Off-Design Performance of an {sCO}2 Compressor Robert Pelton, Sewoong Jung and (2019), DOI: 10.33737/gpps19-tc-087
Seals & Secondary Flows
Exploration of Unsteady and Steady Calculation Methods for Wheel Space Sealing Applications Alexander Lautenschläger, Rene Braun, Karsten Kusterer, Dieter Bohn (2019), DOI: 10.33737/gpps19-tc-053
Numerical and Experimental Investigation of Rim Cavity Sealing Performance in a Turbine Stator Well Reyhaneh Banihabib, Amir Poursamad and (2019), DOI: 10.33737/gpps19-tc-059
Turbines
Aero-Thermal Upgrade of Turbine Section in Mapna Heavy-Duty Gas Turbine {MGT}-70 Amir Poursamad, Hamid Motamedi Zoka, Mohammadreza Shirzadi, Reyhaneh Banihabib, Arash Bahramitalab, Shahriar Abedinnejad, Payam Savadkouhi, Reza Torabideh, Abbas KhaniGouabad (2019), DOI: 10.33737/gpps19-tc-057
Noise Characteristics of a Reduced Blade Count Rotor with Improved Stage Efficiency Rainer Schädler, Dominic Hänni, Anestis Kalfas, Reza Abhari, Gregor Schmid, Ewald Lutum, Carsten Schneider (2019), DOI: 10.33737/gpps19-tc-037