Advanced Cycles & Applications
Engine Airframe Integration Sensitivities for a STOL Commercial Aircraft Concept with Over-the-Wing Mounted UHBR-Turbofans Constance Heykena, Jens Friedrichs, Luciana Savoni, Ralf Rudnik (2018), DOI: doi: 10.5281/zenodo.1341067
Equation of State Comparisons and Evaluations for Applications Through Gas Property Testing and Derivations (2) Sarah B. Simons, Brandon L. Ridens, Shane B. Coogan, Dr. Klaus Brun, Dr. Rainer Kurz (2018), DOI: 10.5281/zenodo.1341073
Exergy Based Energy Statistics Hans E. Wettstein (2018), DOI: 10.5281/zenodo.1326540
A Preliminary Study into Turbofan Performance with LP-HP Power Exchange Hossein Balaghi Enalou, Serhiy Bozhko, Mohamed Rashed, Ponggorn Kulsangcharoen (2018), DOI: 10.5281/zenodo.1341065
Conceptual Design of a Novel Variable Cycle Quiet Power and Propulsion System for Unmanned Aircraft Application David R. Ransom (2018), DOI: 10.5281/zenodo.1341089
Hybrid Electric Powertrain for Long-Haul Trucks and Buses: Preliminary Analysis of a New Concept Based on a Combined Cycle Power Plant Sebastian Bahamonde, Piero Colonna, Carlo De Servi (2018), DOI: 10.5281/zenodo.1341122
Environmental Characterization and In-situ Testing for Gas Turbine Inlet Filter System Selection Jim Benson (2018), DOI: 10.5281/zenodo.1341163
Exploration of Combustor Design for Direct Fired Oxy-fuel Application in a sCO2 Power Cycle Jacob Delimont, Nathan Andrews, Lalit Chordia (2018), DOI: 10.5281/zenodo.1341170
Development of a Dynamic Model For a 250 kW Supercritical CO2 Simple Regenerative Brayton Cycle Plant Richard Dupuis, Andrew Gonis, Henry Saari (2018), DOI: 10.5281/zenodo.1341176
Combustion & Heat Transfer
Numerical Simulation of a Model Spray Flame Under Mild Conditions Using Stochastic Upstream Flow and Temperature Forcing Benedict Enderle, Felix Grimm, Georg Eckel, Manfred Aigner (2018), DOI: 10.5281/zenodo.1341179
Experimental Analysis of the Fuel Flexibility of a Jet-stabilized Micro Gas Turbine Combustor Designed for Low Calorific Gases Hannah E. Bower, Jürgen Roth, Felix Grimm, Timo Zornek, Andreas Schwärzle, Peter Kutne (2018), DOI: 10.5281/zenodo.1341181
Derivation and Numerical Study of Spray Boundary Conditions for a Pressure Swirl Atomizer Issuing into Co-Flowing Air Benedict Enderle, Felix Grimm, Bastian Rauch, Manfred Aigner, Geoffroy Chaussonnet (2018), DOI: 10.5281/zenodo.1342409
Experimental Investigation of an SOFC Off-Gas Combustor for Hybrid Power Plant Usage with Low Heating Values Realised by Natural Gas Addition Timo Lingstädt, Felix Grimm, Thomas Krummrein, Sandro Bücheler, Manfred Aigner (2018), DOI: 10.5281/zenodo.1342414
Kinetics Modeling on NOx Emissions of Gas Turbine Combustors for Syngas Applications Haoyang Liu, Wenkai Qian, Min Zhu, Suhui Li (2018), DOI: 10.5281/zenodo.1342419
Time Accurate Evaluation of Shaped Hole Film Cooling Effectiveness Using an Infrared Compensated Pressure Sensitive Paint Technique Spencer Sperling, Randall Mathison (2018), DOI: 10.5281/zenodo.1342430
Assessment Of Spray Particle Size On Holes Created Through Additive Manufacturing Methods (SLM) Vs Conventionally Drilled Fabian Sanchez, Mathieu Barbacki, Andrew Corber (2018), DOI: 10.5281/zenodo.1342449
Numerical investigation of the blade tip with slot film cooling hole Minho Bang, Seok Min Choi, Sehjin Park, Won-Gu Joo, Hyung Hee Cho (2018), DOI: 10.5281/zenodo.1342644
Numerical Analysis of Thermal Load Variation in a Commercial Engine during Dual Fuel Operation Marco Konle, Thomas Wattraint, Ludovic de Guillebon (2018), DOI: 10.5281/zenodo.1342648
Influence of HTC levels on temperature and stress levels in a leading edge impingement system Robert Pearce, Peter Ireland, Ed Dane (2018), DOI: 10.5281/zenodo.1342652
Conceptual Sizing of a Supercritical Oxyfuel Combustor for a 10MWe Turbine Shane Coogan, Tim Allison, Natalie Smith, Karl Wygant, Kim Gilyoung, Woosung Choi (2018), DOI: 10.5281/zenodo.1342679
Aerothermodynamic Analysis of Heat Recuperation by a Nozzle-Integrated Thermoelectric Generator in a Turbofan Dragan Kožulović, Christoph Bode, Jens Friedrichs (2018), DOI: 10.5281/zenodo.1342682
Sweeping Jet Impingement Heat Transfer on a Simulated Turbine Vane Leading Edge Mohammad A. Hossain, Lucas Agricola, Ali Ameri, James W. Gregory, Jeffrey P. Bons (2018), DOI: 10.5281/zenodo.1342689
Effects of Equivalence Ratio on the Combustion Performance of Staged Swirl Flame Bing Ge, Yinshen Tian, Yongbin Ji, Shusheng Zang, Jianhua Xin, Mingmin Chen, Guangyun Jiao, Dongfang Zhang (2018), DOI: 10.5281/zenodo.1342699
Effect of Uniform and Stepped Pin-Fin Profiles on Heat Transfer and Frictional Losses in a Narrow Channel with AR 4:1 Kishore Ranganath Ramakrishnan, Prashant Singh, Srinath V Ekkad (2018), DOI: 10.5281/zenodo.1342693
Compressor Technology
Design Optimization of a Multi-Stage Axial Compressor Using Throughflow and a Database of Optimal Airfoils Markus Schnoes, Christian Voß, Eberhard Nicke (2018), DOI: 10.5281/zenodo.1342714
Numerical Prediction of The Notch Effect of Riblets on Axial Compressor Blades Lennart Alexander Mähler, Tobias Willeke, Joerg R. Seume (2018), DOI: 10.5281/zenodo.1342723
Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft Felix Kauth, Joerg R. Seume, Axel Mertens, Gerrit Narjes, Bernd Ponick, Jan-Kaspar Müller (2018), DOI: 10.5281/zenodo.1342725
Aeroelastic Assessment of a Highly Loaded High Pressure Compressor Exposed to Pressure Gain Combustion Disturbances Victor Bicalho Civinelli de Almeida, Dieter Peitsch (2018), DOI: 10.5281/zenodo.1342728
Influence of Diffuser Diameter Ratio on the Performance of a Return Channel Within a Centrifugal Compressor Stage Jan Bisping, Tim Rossbach, Daniel Grates, Peter Jeschke, Andre Hildebrandt (2018), DOI: 10.5281/zenodo.1343352
Effects of Stator Platform Geometry Features on Blade Row Performance Derek J Taylor, John P Longley (2018), DOI: 10.5281/zenodo.1343388
Deterioration Effects of Coupled Blisk Blades Andreas Kellersmann, Gerald Reitz, Jens Friedrichs (2018), DOI: 10.5281/zenodo.1343460
Optimization of High Subsonic, High Reynolds Number Axial Compressor Airfoil Sections for Increased Operating Range Daniel Giesecke, Marcel Bullert, Jens Friedrichs, Udo Stark (2018), DOI: 10.5281/zenodo.1343465
Experimental Investigations on Highly Loaded Compressor Airfoils with Different Active Flow Control Parameters Under Unsteady Flow Conditions Christian Brück, Jan Mihalyovics, Dieter Peitsch (2018), DOI: 10.5281/zenodo.1343489
Experimental and Numerical Investigation of Blade Resonance in a Centrifugal Compressor for Varying Gas Properties Carsten Degendorfer, Reza S. Abhari, Klemens Vogel, René Hunziker (2018), DOI: 10.5281/zenodo.1343496
Multipoint Optimisation of Radial Compressor Using Computational Fluid Dynamics and Genetic Algorithm Stefan Tuechler, Zhihang Chen, Colin D. Copeland (2018), DOI: 10.5281/zenodo.1343507
Comparison of Experiments, Full-Annulus-Calculations and Harmonic-Balance-Calculations of a Multi-Stage Compressor Oliver K. Reutter, Eberhard Nicke, Graham Ashcroft, Edmund Kuegeler (2018), DOI: 10.5281/zenodo.1343517
The Development and Application of an Operational Modal Analysis Method for Centrifugal Compressors Jason C. Wilkes, Natalie R. Smith, Tim C. Allison, Chris D. Kulhanek, J. Jeffrey Moore (2018), DOI: 10.5281/zenodo.1343523
Influence of Blade Geometry on Secondary Flow Development in a Transonic Centrifugal Compressor Moritz Mosdzien, Martin Enneking, Alexander Hehn, Daniel R. Grates, Peter Jeschke (2018), DOI: 10.5281/zenodo.1343527
Control & Instrumentation
On the Challenge of Five-Hole-Probe Measurements at High Subsonic Mach Numbers in the Wake of Transonic Turbine Cascades Marcel Boerner, Martin Bitter, Reinhard Niehuis (2018), DOI: 10.5281/zenodo.1344325
Study on Gas Turbine Fault Simulation of Marine Gas Turbine Zhitao Wang, Jian Li, Rui Liu (2018), DOI: 10.5281/zenodo.1344331
Practical Design Guidelines to Prevent Sub-Synchronous Vibration Problems in Integrally Geared Centrifugal Expander Hanwook Jeon, Taewook Lee, Chansun Lim, Kyungdae Kang (2018), DOI: 10.5281/zenodo.1344334
Cloud Based Implementation of a Gas Turbine Remote Monitoring System Sunit Oliver, Dr. Martin Engber, Ryan Mich, Deep Bohra (2018), DOI: 10.5281/zenodo.1344410
An Improved Image Processing Approach for Machinery Fault Diagnosis Kar Hoou Hui, Ching Sheng Ooi, Meng Hee Lim, Mohd Salman Leong, Wai Keng Ngui (2018), DOI: 10.5281/zenodo.1344414
Diagnosis of Reduction Gear Failures of a Power Generation Gas Turbine Due to Excessive Pipe Strain Meng Hee Lim, Salman Leong, Kar Hoou Hui (2018), DOI: 10.5281/zenodo.1344445
Gas Turbine Performance Analysis and Hot-Section Life Prediction Using the GTHM System Daniel Wang (2018), DOI: 10.5281/zenodo.1344469
Design and Modeling
Convergence Criteria for Axial Compressor Flow Calculations Andrew A. Vekinis, John P. Longley (2018), DOI: 10.5281/zenodo.1344488
Optimization of the Laminar Flow Fan Blade Profiles Based on Artificial Neural Network Zhu Jian-Jun, Ding Jian-Guo, Sun Gang (2018), DOI: 10.5281/zenodo.1344506
A Machine Learning Based Body Force Model for Analysis of Fan-Airframe Aerodynamic Interactions Luis López de Vega, Guillaume Dufour, Florian Blanc, William Thollet (2018), DOI: 10.5281/zenodo.1344526
A Comparison of Strategies for Efficient Core Engine Optimization with Coupled Subsystems Simon Extra, Michael Lockan, Dieter Bestle, Peter Flassig (2018), DOI: 10.5281/zenodo.1344538
On the Numerical Simulation of Surge Cycles Using a Quasi-Unsteady Mixing-Plane Approach Kai Becker, Graham Ashcroft, Benedict Geihe, Harald Schönenborn (2018), DOI: 10.5281/zenodo.1344543
Highly efficient Euler-Euler approach for condensing steam flows in turbomachines Pascal Post, Francesca di Mare (2018), DOI: 10.5281/zenodo.1344547
Towards Robust Turbomachinery Design: Parametric Blade Synthesis Based on Quality Control Data Philip Magin, Florian Danner, Matthias Binz, Christoph Keller (2018), DOI: 10.5281/zenodo.1344575
Assessment of fully-turbulent steady and unsteady adjoint sensitivities for stator-rotor interaction in turbomachinery A. Rubino, S. Vitale, M. Pini, P. Colonna (2018), DOI: 10.5281/zenodo.1344577
CAD-Based Adjoint Multidisciplinary Optimization of a Radial Turbine Under Structural Constraints Marc Schwalbach, Lasse Müller, Tom Verstraete, Nicolas R. Gauger (2018), DOI: 10.5281/zenodo.1344590
Assessment of FFD and CAD-based shape parametrization methods for adjoint-based turbomachinery shape optimization Nitish Anand, Salvatore Vitale, Piero Colonna, Matteo Pini (2018), DOI: 10.5281/zenodo.1344595
Cloning Strategy for Aerodynamic Compressor Design Based on Throughflow Analysis Marco Hendler, Dieter Bestle, Peter Flassig (2018), DOI: 10.5281/zenodo.1344599
On the Use of an Inverse Method to Design Turbomachinery Blading of Axial Compressor and Turbine in Three-Dimensional Flow Using a Commercial CFD Program Araz Arbabi, Wahid Ghaly, Adam Medd (2018), DOI: 10.5281/zenodo.1344603
Numerical Simulation of Contrail Ice Particle Growth in the Near Field of an Aircraft Engine Sébastien Cantin, François Morency, François Garnier (2018), DOI: 10.5281/zenodo.1344610
Structure Manf & Materials
Unsteady Flow in a Labyrinth Seal Lars Wein, J. R. Seume, F. Herbst (2018), DOI: 10.5281/zenodo.1344880
Experimental investigation of geometry effect on discharge characteristic for stepped labyrinth seal Shuangguo Deng, Xiuxiu Chen, Daijun Wang (2018), DOI: 10.5281/zenodo.1344941
Probabilistic and Sensitive Analysis of the Secondary Air System of a Two-Spool Engine Shuangguo Deng, Daijun Wang, Xiao Chen (2018), DOI: 10.5281/zenodo.1344966
Research on the Influence of Turbine Blade Fillet Geometry by Strength and Modal Analysis Chunli Liu, Hong He, Shanzi Zhang, Ruedel Uwe Wolfgang (2018), DOI: 10.5281/zenodo.1344976
Numerical Investigation on the Leakage of Brush Seals Alexander Fuchs, Johann Göttler, Oskar J. Haidn (2018), DOI: 10.5281/zenodo.1344984
Determination of the Most Contributing Laser Powder Bed Fusion Process Parameters on the Surface Roughness Quality of Hastelloy X Components Yahya Mahmoodkhani, Usman Ali, Farzad Liravi, Reza Esmaeilizadeh, Ehsan Marzbanrad, Ehsan Toyserkani, Ali Bonakdar (2018), DOI: 10.5281/zenodo.1344991
Study on Creep-Fatigue Combined Damage of a GT Superalloy Blade Shanzi Zhang, Chengxiong Pan, Chunli Liu, Hong He, Ruedel Uwe Wolfgang (2018), DOI: 10.5281/zenodo.1344999
The Role of Thermally Grown Oxide in the Failure Thermal Barrier Coatings for Gas Turbine Engine Applications Vladimir Pankov, Prakash C. Patnaik, Kuiying Chen (2018), DOI: 10.5281/zenodo.1345001
Turbine Technology
Gas-Path Optimization Using Turbine Aerodynamics Meanline and Design Exploration Pascal Doran, Hany Moustapha, Ed Vlasic, Grant Guevremont (2018), DOI: 10.5281/zenodo.1345024
Secondary Flow Mitigation in Turbine Vanes Using Endwall Fence Optimization Giacomo Mingardo, Claudio Lettieri, Matteo Pini, Kakeru Kusano, Yutaka Kawata (2018), DOI: 10.5281/zenodo.1345031
Numerical Loss Breakdwown Study for a Small Scale, Low Specific Speed Supercritical CO2 Radial Inflow Turbine Joshua A. Keep, Ingo H. J. Jahn (2018), DOI: 10.5281/zenodo.1345034
Large Eddy Simulation of Turbine Aerodynamics by Explicit Filtering Pratik Mitra, Joseph Mathew (2018), DOI:
Experimental Investigation on the independent effects of Inlet Flow Angle and Inlet Flow Area for Variable Geometry Turbocharger Turbine Jose F. Cortell Fores, Ricardo Martinez-Botas, Srithar Rajoo (2018), DOI: 10.5281/zenodo.1345048
Experimental and Numerical Investigations of a Low-Pressure Turbine Control Stage Omer Hodzic, Benjamin Winhart, Martin Sinkwitz, David Engelmann, Francesca di Mare, Ronald Mailach (2018), DOI: 10.5281/zenodo.1345052
Effect of Endwall Contouring on the Performance of a Three-Stage HP Turbine Mohsen Rezasoltani, Meinhard T Schobeiri (2018), DOI: 10.5281/zenodo.1345056
Automation of a Turbine Tip Clearance Preliminary Calculation Process Maxime Moret, Francois Garnier, Hany Moustapha, Patricia Phutthavong (2018), DOI: 10.5281/zenodo.1345088
Design, Development and Validation of University of Cincinnati (UC) Film Cooling Research Facility Mouleeswaran Kandampalayam Kandasamy Palaniappan (2018), DOI: 10.5281/zenodo.1345099
Effects of Secondary Flow Tip Injection on Performance and Losses in a Mixed Flow Turbine Hao Liu, Alessandro Romagnoli, Ricardo Martinez-Botas, Srithar Rajoo, Muhamad Hasbullah Padzillah (2018), DOI: 10.5281/zenodo.1345061
Unsteady Flows & Acoustics
Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading Dajan Mimic, Christoph Jätz, Philipp Sauer, Florian Herbst (2018), DOI: 10.5281/zenodo.1345494
Large Eddy Simulation of a Rotor Stage for Fan Noise Source Diagnostic Carlos Pérez Arroyo, Marlene Sanjose, Stéphane Moreau, Florent Duchaine (2018), DOI: 10.5281/zenodo.1345496
Numerical Simulations of an Intake-Compressor System Thomas Kächele, Rudolf P. M. Rademakers, Reinhard Niehuis, Tim Schneider (2018), DOI: 10.5281/zenodo.1345512
Wind Turbine Noise: Regulations, Siting, Perceptions and Noise Reduction Technologies Kenneth W. Van Treuren (2018), DOI: 10.5281/zenodo.1345527
Aeroelastic Effects In A Transonic Compressor With Nonaxisymmetric Tip Clearance Maximilian Jüngst, Daniel Franke, Heinz-Peter Schiffer, Thomas Giersch (2018), DOI: 10.5281/zenodo.1345550
Sensitivity Analysis of Eigenmode Variations on the Flutter Stability of a Highly Loaded Transonic Fan Senad Iseni, Derek Micallef, Francesca di Mare (2018), DOI: 10.5281/zenodo.1345555
A Parametric Study on the Aeroelastic Stability of Rotor Seals Qingyuan Zhuang, Erik Munktell, Yong Lee, Ronnie Bladh (2018), DOI: 10.5281/zenodo.1345559
Investigation of the Effect of Wave Reflection in the Forced Response Study of a Compressor Zhiping Mao, Tianyu Pan, Laith Zori, Shreyas Hegde, Robert E. Kielb, Rubens Campregher (2018), DOI: 10.5281/zenodo.1345566
On Clean Inflow Testing for Intermediate Turbine Ducts M. Steiner, I. Cabona, A. Ramesh, P.Z. Sterzinger, F. Heitmeir, E. Göttlich, G. Gatti, C. Zscherp, K. Engel, A. Peters (2018), DOI: 10.5281/zenodo.1345568
Modeling and Mitigation of Acoustic Induced Vibration (AIV) in Piping Systems Brandon L Ridens, Timothy C Allison, Sarah B. Simons, Klaus Brun (2018), DOI: 10.5281/zenodo.1345570
