Calibrated Low-Order Transient Thermal and Flow Models for Robust Test Facility Design

Imaging Diagnostics of Combustion Instability in Premixed Swirling Combustion

Investigation of a Novel Pressure-Actuated Brush Seal Under Hot Steam Conditions

Investigation of Jet Engine Intake Distortions Caused by Crosswind Conditions

Hybrid Electric Powertrain for Long-haul Trucks and Buses: Preliminary Analysis of a New Concept Based on a Combined Cycle Power Plant

Methodology for High-Accuracy Infrared Calibration in Environments with Through-Wall Heat Flux

Influence of HTC levels on temperature and stress levels in a leading edge impingement system

The sensitivity of turbine cascade endwall loss to inlet boundary layer thickness

Purge flow effects on rotor hub endwall heat transfer with extended endwall contouring into the disk cavity

Parametric study on the aeroelastic stability of rotor seals

Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades

Thermal Energy Storage For Gas Turbine Power Augmentation

Effects of Stator Platform Geometry Features on Blade Row Performance

Superior fuel and operational flexibility of sequential combustion in Ansaldo Energia gas turbines

Influence of Blade Aspect Ratio on Axial Compressor Efficiency

Streamlined frameworks for advancing metal based additive manufacturing technologies

The sensitivity of 3D separations in multi-stage compressors

Accelerated thermal profiling of gas turbine components using luminescent thermal history paints

A novel 4-sensor fast-response aerodynamic probe for non-isotropic turbulence measurement in turbomachinery flows

Numerical modeling of CO-emissions for gas turbine combustors operating at part-load conditions

Correlation between total pressure losses of highly loaded annular diffusers and integral stage design parameters

Sweeping jet impingement heat transfer on a simulated turbine vane leading edge

Experimental and numerical investigation of blade resonance in a centrifugal compressor for varying gas properties

Influence of blade geometry on secondary flow development in a transonic centrifugal compressor

Numerical simulations of an intake-compressor system

On the challenge of five-hole-probe measurements at high subsonic Mach numbers in the wake of transonic turbine cascades

Deterioration effects of coupled blisk blades

Aeroelastic assessment of a highly loaded high pressure compressor exposed to pressure gain combustion disturbances

Evaluation of ultra-high bypass ratio engines for an over-wing aircraft configuration

Design optimization of a multi-stage axial compressor using throughflow and a database of optimal airfoils

On the choice of contact parameters for the forced response calculation of a bladed disk with underplatform dampers

Operational and financial performance of fossil fuel power plants within a high renewable energy mix

Gas turbine advanced power systems to improve SOFC economic viability

Tip gap size effects on thermal performance of cavity-winglet tips in transonic turbine cascade with endwall motion

Improvement of the turn-down ratio of gas turbines by autothermal on board syngas generation

Estimation accuracy vs. engineering significance of contact parameters for solid dampers

CFD based approach to predict the windage heating effect in steam turbine labyrinth seals

Unsteady flow mechanisms in the last stage of a transonic low pressure steam turbine - multistage effects and tip leakage flows

Novel high-pressure turbine purge control features for increased stage efficiency

Application of a three-step approach for prediction of combustion instabilities in industrial gas turbine burners

Assessment of turbulence model predictions for a centrifugal compressor simulation

Measurement of thermal parameter and Reynolds number effects on cavitation instability onset in a turbopump inducer

Numerical method for an assessment of steady and motion-excited flowfields in a transonic cascade wind tunnel

Staged combustion concept for gas turbines

Benchmarking data from the experience gained in engine performance and emissions testing on alternative fuels for aviation

Effect of purge air on rotor endwall heat transfer of an axial turbine

The effect of volute surface roughness on the performance of automotive turbocharger turbines

Unsteady behaviours of a volute in turbocharger turbine under pulsating conditions

Fully turbulent discrete adjoint solver for non-ideal compressible flow applications.

Turbine blade tip aero-thermal management: Some recent advances and research outlook

Pressure gain combustion advantage in land-based electric power generation

PIV measurements of the transient flow structure in the tip region of a transonic compressor near stability limit