GPPS Hong Kong23: Call for Papers

Join us for the GPPS turbomachinery conference in Hong Kong 2023
Hosted in Hong Kong

Review Timeline

Abstract Submission:
8th March, 2023

Abstract Acceptance:
17th March, 2023

Full Paper Submission:
30th April, 2023

Paper Acceptance:
17th July, 2023

Revised Paper Submission:
14th August, 2023

Revised Paper Acceptance:
29th August, 2023

Final File Submission:
4th September, 2023

Call for Papers

Technical Conference for Propulsion and Power Industry

The Global Power and Propulsion Society has issued a Call for Papers for its 2023 International Technical Conference to be held in Hong Kong, China taking place on October 17 – 19th, 2023.

The focus of the conference addresses ‘The promise of 2050, when the Power is Clean and Global Travel is Electrifying’

Authors have been invited to submit abstracts between 100 – 200 words related to the following topics:

  • Aeroacoustics & Noise
  • Combustor & Combustion
  • Deposition, Erosion, Fouling & Icing in Gas Turbines
  • Ducts, Nozzles, Exhausts & Component Interaction and Integration
  • Energy Systems & Carriers
  • Energy Transition & Renewables
  • Heat Transfer
    • General interest
    • Film cooling
    • Internal cooling
    • Design and analysis methods
  • Instrumentation, Control, Testing, Monitoring & Diagnostics
  • Secondary Air System & Sealing
  • Mechanics and Materials
    • Stress and vibration
    • Fatigue, fracture and life
    • Rotordynamics
    • Seal/bearing dynamics
    • Design and analysis methods
    • New materials, coatings, manufacturing
  • Supercritical CO2
  • Thermodynamic Cycles for Power and Propulsion
  • Turbomachinery Aerodynamics
    • Axial-flow compressors
    • Radial/mixed-flow compressors
    • Fans/blowers
    • Turbochargers, small turbomachines, new applications
    • Axial/radial-flow turbines
    • Steam turbines
    • Wind turbines
    • Design and analysis methods
  • Turbomachinery Aeroelasticity
    • Flutter
    • Forced response
    • Nonsynchronous vibration
    • Design and analysis methods
  • Turbomachinery Unsteady Aerodynamics
    • General interest
    • Rotating stall, rotating instability and surge
    • Blade row interaction and inlet distortion
    • Design and analysis methods
  • Pumps

Submission Guidelines

Authors should submit an abstract of 100 – 200 words through the GPPS webtool, submission instructions can be downloaded here as PDF.

Final acceptance of papers will be determined by peer review of the draft manuscripts and approval of final papers by the Review Chair. If warranted by review, papers may also be recommended for publication in the GPPS  journal.

One Author for each paper published in the Conference must attend to present. A registration fee is required.

All presented papers will be published after the Conference, with selected papers published within the GPPS  journal after the event.

In case of any issues regarding the submission process, please contact Ben Newton on ben.newton@gpps.global.

Please note: Where applicable, approval of your paper by your associated company is often required. 

Copyright Notice

Authors of the Hong Kong23 Technical Conference will retain the copyright for submitted papers published as Conference Proceedings.

 

Submission Templates

Copyright: Attribution 4.0 International
(CC BY 4.0)


Copyright: Attribution-NonCommercial 4.0 International
(CC BY-NC)

Copyright: Attribution-NonCommercial-NoDerivatives 4.0 International
(CC-BY-NC-ND).

Copyright: Attribution 4.0 International
(CC BY 4.0)


Copyright: Attribution-NonCommercial 4.0 International
(CC BY-NC)

Copyright: Attribution-NonCommercial-NoDerivatives 4.0 International
(CC-BY-NC-ND).

Copyright: Attribution 4.0 International
(CC BY 4.0)


Copyright: Attribution-NonCommercial 4.0 International
(CC BY-NC)

Copyright: Attribution-NonCommercial-NoDerivatives 4.0 International
(CC-BY-NC-ND).

Copyright: Attribution 4.0 International
(CC BY 4.0)


Copyright: Attribution-NonCommercial 4.0 International
(CC BY-NC)

Copyright: Attribution-NonCommercial-NoDerivatives 4.0 International
(CC-BY-NC-ND).

Our location

With team members spread across the globe, the core team is based in Zurich Switzerland.

m

Landis + Gyr-Strasse 1, 6300 Zug