GPPS Event Archive
Proceedings / Global Power & Propulsion Forum
Montreal 2018
ISSN-Nr: 2504-4400
ISSN-Nr: 2504-4400
Advanced Cycles & Applications
Paper |
Author |
Affiliation |
[023] Exergy Based Energy Statistics | → Hans E. Wettstein | HEW Consulting, Zurich Switzerland |
[039] A Preliminary Study into Turbofan Performance with LP-HP Power Exchange | → Hossein Balaghi Enalou → Serhiy Bozhko → Mohamed Rashed → Ponggorn Kulsangcharoen |
University of Nottingham UK |
[109] Engine Airframe Integration Sensitivities for a STOL Commercial Aircraft Concept with Over-the-Wing Mounted UHBR-Turbofans | → Constance Heykena* → Jens Friedrichs* → Luciana Savoni** → Ralf Rudnik** |
*Institute of Jet Propulsion and Turbomachinery, Technische Universität, Braunschweig Germany **Institute of Aerodynamics and Flow Technology, Deutsches Zentrum für Luft- und Raumfahrt e.V. Germany |
[119] Equation of State Comparisons and Evaluations for Applications Through Gas Property Testing and Derivations | → Sarah B. Simons* → Brandon L. Ridens* → Shane B. Coogan* → Dr. Klaus Brun* → Dr. Rainer Kurz** |
*Southwest Research Institute, San Antonio, Texas USA **Solar Turbines, Inc., San Diego, California USA |
[126] Conceptual Design of a Novel Variable Cycle Quiet Power and Propulsion System for Unmanned Aircraft Application | → David R. Ransom | Southwest Research Institute USA |
[137] Hybrid Electric Powertrain for Long-Haul Trucks and Buses: Preliminary Analysis of a New Concept Based on a Combined Cycle Power Plant | → Sebastian Bahamonde* → Piero Colonna* → Carlo De Servi** |
*Propulsion and Power, Delft University of Technology Netherlands **Energy Technology, Flemish Institute for Technological Research (VITO) Belgium |
[147] Environmental Characterization and In-situ Testing forGas Turbine Inlet Filter System Selection | → Jim Benson | Camfil Power System, Laval, Quebec Canada |
[157] Exploration of Combustor Design for Direct Fired Oxy-fuel Application in a sCO2 Power Cycle | → Jacob Delimont → Nathan Andrews → Lalit Chordia |
Southwest Research Institute, San Antonio, Texas USA *Thar Energy, Pittsburg USA |
[192] Development of a Dynamic Model For a 250 kW Supercritical CO2 Simple Regenerative Brayton Cycle Plant | → Richard Dupuis* → Andrew Gonis* → Henry Saari** |
*Gastops Ltd. Canada **Carleton University Canada |
Combustion & Heat Transfer
Paper |
Author |
Affiliation |
[005] Numerical Simulation of a Model Spray Flame Under Mild Conditions Using Stochastic Upstream Flow and Temperature Forcing | → Benedict Enderle → Felix Grimm → Georg Eckel → Manfred Aigner |
German Aerospace Center (DLR) Germany |
[012] Experimental Analysis of the Fuel Flexibility of a Jetstabilized Micro Gas Turbine Combustor Designed for Low Calorific Gases | → Hannah E. Bower → Jürgen Roth → Felix Grimm → Timo Zornek → Andreas Schwärzle → Peter Kutne |
German Aerospace Center (DLR) Germany |
[016] Derivation and Numerical Study of Spray Boundary Conditions for a Pressure Swirl Atomizer Issuing into Co-Flowing Air | → Benedict Enderle* → Felix Grimm* → Bastian Rauch* → Manfred Aigner* → Geoffroy Chaussonnet** |
*German Aerospace Center (DLR), Germany **Institute of Thermal Turbomachinery Karlsruhe Institute of Technology Germany |
[052] Experimental Investigation of an SOFC Off-Gas Combustor for Hybrid Power Plant Usage with Low Heating Values Realised by Natural Gas Addition | → Timo Lingstädt → Felix Grimm → Thomas Krummrein → Sandro Bücheler → Manfred Aigner |
German Aerospace Center (DLR) Germany |
[055] Kinetics Modeling on NOx Emissions of Gas Turbine Combustors for Syngas Applications | → Haoyang Liu → Wenkai Qian → Min Zhu → Suhui Li |
Department of Energy and Power Engineering, Tsinghua University China |
[060] Time Accurate Evaluation of Shaped Hole Film Cooling Effectiveness Using an Infrared Compensated Pressure Sensitive Paint Technique | → Spencer Sperling → Randall Mathison |
The Ohio State University USA |
[073] Assessment Of Spray Particle Size On Holes Created Through Additive Manufacturing Methods (SLM) Vs Conventionally Drilled | → Fabian Sanchez* → Mathieu Barbacki* → Andrew Corber** |
*Siemens Canada Canada **National Research Council of Canada Canada |
[076] Numerical investigation of the blade tip with slot film cooling hole | → Minho Bang → Seok Min Choi → Sehjin Park → Won-Gu Joo → Hyung Hee Cho |
Yonsei University, Seoul Republic of Korea |
[086] Numerical Analysis of Thermal Load Variation in a Commercial Engine during Dual Fuel Operation | → Marco Konle → Thomas Wattraint → Ludovic de Guillebon |
MTU Aero Engines AG Germany |
[115] Influence of HTC Levels on Temperature and Stress Levels in a Leading Edge Impingement System | → Robert Pearce* → Peter Ireland* → Ed Dane** |
*University of Oxford UK **Rolls-Royce plc UK |
[136] Conceptual Sizing of a Supercritical Oxyfuel Combustor for a 10MWe Turbine | → Shane Coogan* → Tim Allison* → Natalie Smith* → Karl Wygant** → Kim Gilyoung*** → Woosung Choi**** |
*Southwest Research Institute USA **Hanwha Power Systems USA **Hanwha Power Systems South Korea ****KEPCO Research Institute South Korea |
[143] Aerothermodynamic Analysis of Heat Recuperation by a Nozzle-Integrated Thermoelectric Generator in a Turbofan | → Dragan Kožulović* → Christoph Bode** → Jens Friedrichs** |
*Department Automotive and Aerospace Hamburg University of Applied Sciences Germany **Institute of Jet Propulsion and Turbomachinery Technische Universität Braunschweig Germany |
[148] Sweeping Jet Impingement Heat Transfer on a Simulated Turbine Vane Leading Edge | → Mohammad A. Hossain → Lucas Agricola → Ali Ameri → James W. Gregory → Jeffrey P. Bons |
Department of Mechanical and Aerospace Engineering, The Ohio State University USA |
[159] Effect of Uniform and Stepped Pin-Fin Profiles on Heat Transfer and Frictional Losses in a Narrow Channel with AR 4:1 | → Kishore Ranganath Ramakrishnan* → Prashant Singh → Srinath V Ekkad |
Department of Mechanical and Aerospace Engineering North Carolina State University USA |
[174] Effects of Equivalence Ratio on the Combustion Performance of Staged Swirl Flame | → Bing Ge* → Yinshen Tian* → Yongbin Ji* → Shusheng Zang* → Jianhua Xin* → Mingmin Chen** → Guangyun Jiao** → Dongfang Zhang** |
*Institute of Turbomachinery, School of Mechanical Engineering, Shanghai Jiao Tong University China **Shanghai Electric Gas Turbine CO.,Ltd China |
Compressor Technology
Paper |
Author |
Affiliation |
[009] Design Optimization of a Multi-Stage Axial Compressor Using Throughflow and a Database of Optimal Airfoils | → Markus Schnoes → Christian Voß → Eberhard Nicke |
German Aerospace Center (DLR), Institute of Propulsion Technology Germany |
[025] Numerical Prediction of The Notch Effect of Riblets on Axial Compressor Blades | → Lennart Alexander Mähler* → Tobias Willeke* → Joerg R. Seume** |
*Formerly Leibniz Universität Germany **Institute of Turbomachinery and Fluid Dynamics Leibniz Universität Germany |
[026] Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future Aircraft | → Felix Kauth* → Joerg R. Seume* → Axel Mertens** → Gerrit Narjes** → Bernd Ponick** → Jan-Kaspar Müller** |
*Institute of Turbomachinery and Fluid Dynamics Leibniz Universität Hannover Germany **Institute for Drive Systems and Power Electronics Leibniz Universität Hannover Germany |
[029] Aeroelastic Assessment of a Highly Loaded High Pressure Compressor Exposed to Pressure Gain Combustion Disturbances | → Victor Bicalho Civinelli de Almeida → Dieter Peitsch |
Department of Aeronautics and Astronautics, Technische Universität Berlin Germany |
[034] Influence of Diffuser Diameter Ratio on the Performance of a Return Channel Within a Centrifugal Compressor Stage | → Jan Bisping* → Tim Rossbach* → Daniel Grates* → Peter Jeschke* → Andre Hildebrandt** |
*Institute of Jet Propulsion and Turbomachinery, RWTH Aachen University Germany **MAN Diesel & Turbo SE Germany |
[040] Effects of Stator Platform Geometry Features on Blade Row Performance | → Derek J Taylor → John P Longley |
Whittle laboratory University of Cambridge UK |
[045] Deterioration Effects of Coupled Blisk Blades | → Andreas Kellersmann → Gerald Reitz → Jens Friedrichs |
Institute of Jet Propulsion and Turbomachinery, Technische Universität Braunschweig Germany |
[047] Optimization of High Subsonic, High Reynolds Number Axial Compressor Airfoil Sections for Increased Operating Range | → Daniel Giesecke → Marcel Bullert → Jens Friedrichs → Udo Stark |
* TU Braunschweig, Institute of Jet Propulsion and Turbomachinery, Germany **TU Braunschweig, Institute of Fluid Mechanics Germany |
[054] Experimental Investigations on Highly Loaded Compressor Airfoils with Different Active Flow Control Parameters Under Unsteady Flow Conditions | → Christian Brück → Jan Mihalyovics → Dieter Peitsch |
Institute of Aeronautics and Astronautics, Technische Universität Berlin, Germany |
[062] Experimental and Numerical Investigation of Blade Resonance in a Centrifugal Compressor for Varying Gas Properties | → Carsten Degendorfer* → Reza S. Abhari* → Klemens Vogel** → René Hunziker** |
*Swiss Federal Institute of Technology Switzerland **ABB Turbo Systems Ltd. Switzerland |
[064] Multipoint Optimisation of Radial Compressor Using Computational Fluid Dynamics and Genetic Algorithm | → Stefan Tuechler → Zhihang Chen → Colin D. Copeland |
Department of Mechanical Engineering, University of Bath UK |
[123] Comparison of Experiments, Full-Annulus-Calculations and Harmonic-Balance-Calculations of a Multi-Stage Compressor | → Oliver K. Reutter → Eberhard Nicke → Graham Ashcroft → Edmund Kuegeler |
DLR, German Aerospace Center, Institute of Propulsion Technology Germany |
[125] The Development and Application of an Operational Modal Analysis Method for Centrifugal Compressors | → Jason C. Wilkes → Natalie R. Smith → Tim C. Allison → Chris D. Kulhanek → J. Jeffrey Moore |
Southwest Research Institute USA |
[138] Influence of Blade Geometry on Secondary Flow Development in a Transonic Centrifugal Compressor | → Moritz Mosdzien → Martin Enneking → Alexander Hehn → Daniel R. Grates → Peter Jeschke |
Institute of Jet Propulsion and Turbomachinery Germany |
Control & Instrumentation
Paper |
Author |
Affiliation |
[013] On the Challenge of Five-Hole-Probe Measurements at High Subsonic Mach Numbers in the Wake of Transonic Turbine Cascades | → Marcel Boerner → Martin Bitter → Reinhard Niehuis |
Institute of Jet Propulsion Bundeswehr University Muenchen Germany |
[022] Study on Gas Turbine Fault Simulation of Marine Gas Turbine | → Zhitao Wang → Jian Li → Rui Liu |
Harbin Engineering University, Harbin China |
[110] Practical Design Guidelines to Prevent Sub-Synchronous Vibration Problems in Integrally Geared Centrifugal Expander | → Hanwook Jeon* → Taewook Lee* → Chansun Lim* → Kyungdae Kang** |
*Hanwha Power Systems Republic of Korea **Hanwha Techwin Republic of Korea |
[149] Cloud Based Implementation of a Gas Turbine Remote Monitoring System | → Sunit Oliver* → Dr. Martin Engber* → Ryan Mich** → Deep Bohra** |
*Vericor Power Systems, LLC, Alpharetta USA **Microsoft Corporation, Alpharetta USA |
[163] An Improved Image Processing Approach for Machinery Fault Diagnosis | → Kar Hoou Hui* → Ching Sheng Ooi* → Meng Hee Lim* → Mohd Salman Leong* → Wai Keng Ngui** |
*Universiti Teknologi Malaysia Malaysia **Universiti Malaysia PahangMalaysia |
[164] Diagnosis of Reduction Gear Failures of a Power Generation Gas Turbine Due to Excessive Pipe Strain | → Meng Hee Lim → Salman Leong → Kar Hoou Hui |
Institute of Noise and Vibration, UTM Malaysia |
[175] Gas Turbine Performance Analysis and Hot-Section Life Prediction Using the GTHM System | → Daniel Wang | Liburdi Turbine Services, LLC Canada |
Design & Modeling
Paper |
Author |
Affiliation |
[027] Improvement of an automated design process and investigation of the optimization approach and the dependencies of the individual objectives | → Eduard Braining → Peter Buehler → Alexander Lautenschlaeger → Kristof Weidtmann → René Braun |
B&B-AGEMA Germany |
[042] Convergence Criteria for Axial Compressor Flow Calculations | → Andrew A. Vekinis → John P. Longley |
Whittle Laboratory University of Cambridge UK |
[085] Optimization of the Laminar Flow Fan Blade Profiles Based on Artificial Neural Network | → Zhu Jian-Jun* → Ding Jian-Guo* → Sun Gang** |
*AECC Commercial Aircraft Engine Co.,LTD., China **Fudan University China |
[090] A Machine Learning Based Body Force Model for Analysis of Fan-Airframe Aerodynamic Interactions | → Luis López de Vega* → Guillaume Dufour** → Florian Blanc*** → William Thollet*** |
* ISAE-SUPAERO + Airbus Operations France ** ISAE-SUPAERO + Université de Toulouse France ***Airbus Operations France |
[097] A Comparison of Strategies for Efficient Core Engine Optimization with Coupled Subsystems | → Simon Extra → Michael Lockan → Dieter Bestle → Peter Flassig |
*Brandenburg University of Technology, Germany **Rolls-Royce Deutschland Ltd & Co KG Germany |
[105] On the Numerical Simulation of Surge Cycles Using a Quasi-Unsteady Mixing-Plane Approach | → Kai Becker* → Graham Ashcroft* → Benedict Geihe* → Harald Schönenborn** |
*German Aerospace Center (DLR), Germany **MTU Aero Engines AG Germany |
[106] Highly efficient Euler-Euler approach for condensing steam flows in turbomachines | → Pascal Post → Francesca di Mare |
Concordia University Canada |
[122] Recent Progess in High-Order Methods for Scale Resolving Simulations of Low Pressure Turbines | → Brian C. Vermeire | *Siemens Canada Canada **National Research Council of Canada Canada |
[127] Towards Robust Turbomachinery Design: Parametric Blade Synthesis Based on Quality Control Data | → Philip Magin* → Florian Danner* → Matthias Binz** → Christoph Keller** |
* MTU Aero Engines AG, Germany ** RWTH Aachen University Institute of Jet Propulsion and Turbomachinery Germany |
[130] Assessment of fully-turbulent steady and unsteady adjoint sensitivities for stator-rotor interaction in turbomachinery | → A. Rubino → S. Vitale → M. Pini → P. Colonna |
Delft University of Technology Netherlands |
[133] CAD-Based Adjoint Multidisciplinary Optimization of a Radial Turbine Under Structural Constraints | → Marc Schwalbach* → Lasse Müller* → Tom Verstraete* → Nicolas R. Gauger** |
*von Karman Institute for Fluid Dynamics Belgium **TU Kaiserslautern Germany |
[135] Assessment of FFD and CAD-based shape parametrization methods for adjoint-based turbomachinery shape optimization. | → Nitish Anand → Salvatore Vitale → Piero Colonna → Matteo Pini |
Propulsion and Power, Delft University of Technology Netherlands |
[144] Cloning Strategy for Aerodynamic Compressor Design Based on Throughflow Analysis | → Marco Hendler* → Dieter Bestle* → Peter Flassig** |
*Brandenburg University of Technology Cottbus-SenftenbergTurbines Germany **Rolls-Royce Deutschland Ltd & Co KG Germany |
[155] On the Use of an Inverse Method to Design Turbomachinery Blading of Axial Compressor and Turbine in Three-Dimensional Flow Using a Commercial CFD Program | → Araz Arbabi → Wahid Ghaly → Adam Medd |
*Dept. of Mechanical and Industrial Engineering, Concordia University Canada **Honeywell International Canada |
[167] Numerical Simulation of Contrail Ice Particle Growth in the Near Field of an Aircraft Engine | → Sébastien Cantin → François Morency → François Garnier |
Department of Mechanical Engineering, École de technologie supérieure Canada |
Structure Manf & Materials
Paper |
Author |
Affiliation |
[036] Unsteady Flow in a Labyrinth Seal | → Lars Wein → J. R. Seume → F. Herbst |
Institute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover Germany |
[079] Experimental investigation of geometry effect on discharge characteristic for stepped labyrinth seal |
→ Shuangguo Deng → Xiuxiu Chen → Daijun Wang |
AECC Commercial Aircraft Engine Co., LTD China |
[080] Probabilistic and Sensitive Analysis of the Secondary Air System of a Two-Spool Engine | → Shuangguo Deng → Daijun Wang → Xiao Chen |
AECC Commercial Aircraft Engine Co., LTD China |
[111] Research on the Influence of Turbine Blade Fillet Geometry by Strength and Modal Analysis | → Chunli Liu* → Hong He* → Shanzi Zhang* → Ruedel Uwe Wolfgang** |
*Shanghai Electric Gas Turbine Co., Ltd, Shanghai China **Ansaldo Energia Switzerland |
[118] Numerical Investigation on the Leakage of Brush Seals | → Alexander Fuchs* → Johann Göttler* → Oskar J. Haidn** |
*MTU Aero Engines AG Germany **Technical University of Munich Germany |
[132] Determination of the Most Contributing Laser Powder Bed Fusion Process Parameters on the Surface Roughness Quality of Hastelloy X Components | → Yahya Mahmoodkhani* → Usman Ali* → Farzad Liravi* → Reza Esmaeilizadeh* → Ehsan Marzbanrad* → Ehsan Toyserkani* → Ali Bonakdar** |
*University of Waterloo, Ontario Canada **Siemens Canada Limited Québec Canada |
[154] Study on Creep-Fatigue Combined Damage of a GT Superalloy Blade | → Shanzi Zhang → Chengxiong Pan → Chunli Liu → Hong He → Ruedel Uwe Wolfgang |
*Shanghai Electric Gas Turbine Co., Ltd, Shanghai China *Ansaldo Energia S.p.A, Switzerland |
[161] The Role of Thermally Grown Oxide in the Failure Thermal Barrier Coatings for Gas Turbine Engine Applications | → Vladimir Pankov → Prakash C. Patnaik → Kuiying Chen |
National Research Council Canada Canada |
Turbine Technology
Paper |
Author |
Affiliation |
[014] Gas-Path Optimization Using Turbine Aerodynamics Meanline and Design Exploration | → Pascal Doran* → Hany Moustapha* → Ed Vlasic** → Grant Guevremont** |
*École de technologie supérieure Canada **Pratt & Whitney Canada Canada |
[058] Secondary Flow Mitigation in Turbine Vanes Using Endwall Fence Optimization | → Giacomo Mingardo* → Claudio Lettieri** → Matteo Pini** → Kakeru Kusano*** → Yutaka Kawata*** |
*Avio Aero Italy **Delft University of Technology Netherlands ***Osaka Institute of Technology Japan |
[071] Numerical Loss Breakdwown Study for a Small Scale, Low Specific Speed Supercritical CO2 Radial Inflow Turbine | → Joshua A. Keep* → Ingo H. J. Jahn** |
*Queensland Geothermal Energy Centre of Excellence University of Queensland Australia **Centre for Hypersonics University of Queensland Australia |
[094] Large Eddy Simulation of Turbine Aerodynamics by Explicit Filtering | → Pratik Mitra → Joseph Mathew |
Department of Aerospace Engineering, Indian Institute of Science India |
[095] Experimental Investigation on the independent effects of Inlet Flow Angle and Inlet Flow Area for Variable Geometry Turbocharger Turbine | → Jose F. Cortell Fores* → Ricardo Martinez-Botas* → Srithar Rajoo** |
*Imperial College London UK **UTM Centre for Low Carbon Transport (LoCARtic) Malaysia |
[098] Experimental and Numerical Investigations of a Low-Pressure Turbine Control Stage | → Omer Hodzic* → Benjamin Winhart* → Martin Sinkwitz* → David Engelmann* → Francesca di Mare* → Ronald Mailach** |
*Ruhr-Universität Bochum Germany **Technische Universität Dresden, Germany |
[145] Effect of Endwall Contouring on the Performance of a Three-Stage HP Turbine | → Mohsen Rezasoltani* → Meinhard T Schobeiri** |
*Solar Turbines Inc. USA **Texas A&M University USA |
[151] Effects of Secondary Flow Tip Injection on Performance and Losses in a Mixed Flow Turbine | → Hao Liu* → Alessandro Romagnoli** → Ricardo Martinez-Botas*** → Srithar Rajoo**** → Muhamad Hasbullah Padzillah**** |
*Interdisciplinary Graduate School Nanyang Technological University, Singapore **School of Mechanical and Aerospace Engineering Nanyang Technological University Singapore ***Department of Mechanical Engineering, Imperial College London UK ****Faculty of Mechanical Engineering Universiti Teknologi Malaysia Malaysia |
[165] Automation of a Turbine Tip Clearance Preliminary Calculation Process | → Maxime Moret* → Francois Garnier* → Hany Moustapha* → Patricia Phutthavong** |
*Ecole de Technologie Superieure Canada **Pratt and Whitney Canada |
[173] Design, Development and Validation of University of Cincinnati (UC) Film Cooling Research Facility | → Mouleeswaran Kandampalayam Kandasamy Palaniappan | University of Cincinnati USA |
Unsteady Flows & Acoustics
Paper |
Author |
Affiliation |
[004] Steady and Unsteady Flow Phenomena in an Engine Intake Research Duct With and Without Passive Flow Control | → Rudolf P. M. Rademakers* → Reinhard Niehuis* → Marcel Stößel** |
*Institute of Jet Propulsion, Bundeswehr University Munich Germany *Wehrtechnische Dienststelle für Luftfahrzeuge und Luftfahrtgerät der Bundeswehr Germany |
[006] Increasing Boundary Layer Stability for Varying Degrees of Diffuser Loading | → Dajan Mimic → Christoph Jätz → Philipp Sauer → Florian Herbst |
Institute of Turbomachinery and Fluid Dynamics, Leibniz Universität Hannover Germany |
[008] Large Eddy Simulation of a Rotor Stage for Fan Noise Source Diagnostic | → Carlos Pérez Arroyo* → Marlene Sanjose* → Stéphane Moreau* → Florent Duchaine** |
*Université de Sherbrooke Canada **CERFACS France |
[010] Numerical Simulations of an Intake-Compressor System | → Thomas Kächele* → Rudolf P. M. Rademakers* → Reinhard Niehuis* → Tim Schneider** |
*Kächele, Rudolf P. M. Rademakers, Institute of Jet Propulsion Bundeswehr University Munich Germany **MTU Aero Engines AG Germany |
[035] Wind Turbine Noise: Regulations, Siting, Perceptions and Noise Reduction Technologies | → Kenneth W. Van Treuren | Baylor University USA |
[041] Aeroelastic Effects In A Transonic Compressor With Nonaxisymmetric Tip Clearance | → Maximilian Jüngst* → Daniel Franke* → Heinz-Peter Schiffer* → Thomas Giersch** |
*TU Darmstadt Institute of Gas Turbines and Aerospace Propulsion Germany **Rolls Royce Deutschland Ltd & Co KG Germany |
[072] Sensitivity Analysis of Eigenmode Variations on the Flutter Stability of a Highly Loaded Transonic Fan | → Senad Iseni → Derek Micallef → Francesca di Mare |
Chair of Thermal Turbomachines and Aeroengines, Bochum Germany |
[089] A Parametric Study on the Aeroelastic Stability of Rotor Seals | → Qingyuan Zhuang* → Erik Munktell* → Yong Lee* → Ronnie Bladh** |
*Siemens Industrial Turbomachinery AB Sweden **Siemens Energy, Inc. USA |
[113] Intake Geometry and Shear Layer Ingestion Effects on Embedded Propelling Fan Performance | → Theofilos G. Efstathiadis → Vasilis G. Gkoutzamanis → Michalis E. Vourakis → Anestis I. Kalfas |
Laboratory of Fluid Mechanics and Turbomachinery, Department of Mechanical Engineering, AUTH Greece |
[124] Investigation of the Effect of Wave Reflection in the Forced Response Study of a Compressor | → Zhiping Mao* → Tianyu Pan* + ** → Laith Zori*** → Shreyas Hegde* → Robert E. Kielb* → Rubens Campregher**** |
*Department of Mechanical Engineering and Materials Science, Duke University USA **School of Energy and Power Engineering, Beihang University China ***ANSYS Inc, Lebanon, NH USA ****Ansys Canada Ltd. Waterloo, ON Canada |
[128] On Clean Inflow Testing for Intermediate Turbine Ducts | → M. Steiner* → I. Cabona* → A. Ramesh* → P.Z. Sterzinger* → F. Heitmeir* → E. Göttlich* → G. Gatti** → C. Zscherp*** → K. Engel*** → A. Peters**** |
*Graz University of Technology Austria **Politecnico di Milano Italy ***MTU Aero Engines Germany ****GE Aviation Germany |
[150] Modeling and Mitigation of Acoustic Induced Vibration (AIV) in Piping Systems | → Brandon L Ridens → Timothy C Allison → Sarah B. Simons → Klaus Brun, Ph.D. |
Southwest Research Institute USA |