Axial Compressors
Control of the Axial Compressor Blade Airfoil Boundary Layer Flow Using Plasma Actuation Haideng Zhang, Yun Wu, Yinghong Li v (2019), DOI: 10.33737/gpps19-bj-025
Uncertainty Analysis of Aerodynamic Performance for Tip Clearance Size of Compressor Chi Ma, Limin Gao, Ruiyu Li, Wu Yu, Heng Jiang (2019), DOI: 10.33737/gpps19-bj-035
Momentum Transportation Analysis in Axial-slot Casing Treatment for Axial Compressors Junda Feng, Mingmin Zhu, Jinfang Teng, Xiaoqing Qiang (2019), DOI: 10.33737/gpps19-bj-097
An Analytical Approach to Estimate the Effect of Surface Roughness on Particle Rebound Johannes Altmeppen, Heike Sommerfeld, Christian Koch Christian Koch, Staudacher Staudacher (2019), DOI: 10.33737/gpps19-bj-099
Effect of Casing Treatment on the Type of Instability Inception in a High-Speed Axial Compressor Wenqian Wu, Tianyu Pan, Qiushi Li (2019), DOI: 10.33737/gpps19-bj-100
The Influence of Backward Sweep on Aerodynamic Performance of a 1.5-Stage Highly Loaded Axial Compressor Song Huang, Chengyu Yang, Mingyang Wang, Shenfeng Zhao, Xingen Lu (2019), DOI: 10.33737/gpps19-bj-118
Experimental Investigation of a Transonic Compressor with High Aspect Ratio Rotor Design Steffen Hormel, Daniel Franke, Jonas Foret, Heinz-Peter Schiffer, Tobias Froebel (2019), DOI: 10.33737/gpps19-bj-157
Application of Stall Warning Approach with Stall Precursor Suppressed Casing Treatment on a Two-Stage Compressor Ruize Xu, Xu Dong, Jia Li, Dakun Sun, Xiaofeng Sun (2019), DOI: 10.33737/gpps19-bj-170
Study of Sloped Trench Casing Treatment on Performance and Stability of Axial Compressors Jiexuan Hou, Yangwei Liu and (2019), DOI: 10.33737/gpps19-bj-179
Effects of Increasing Bypass Ratio of {UHBR} Fans on Near Hub Flow Torben Eggers, Jens Friedrichs and (2019), DOI: 10.33737/gpps19-bj-186
Compressor Stabilization with Casing Treatment Based on System Impedance Boundary Condition Xu Dong, Jia Li, Dakun Sun, Xiaofeng Sun (2019), DOI: 10.33737/gpps19-bj-208
Flow Control of Radial Migration along the Rotor Suction Surface Yu Chen Dai, Donghai Jin, Xinmin Gui (2019), DOI: 10.33737/gpps19-bj-233
Control 0f Secondary Crossflow in a High-Speed Compressor Cascade by Endwall Fences with Varying Locations Yunzhi Chen, Ling Yang, Jingjun Zhong (2019), DOI: 10.33737/gpps19-bj-235
Recent Insights into the Flow Topology Around Highly Loaded Tandem Vanes Alexander Heinrich, Dieter Peitsch and (2019), DOI: 10.33737/gpps19-bj-225
Numerical Investigation on the Performance of Transonic Axial Compressor with Naturally Aspirated Slots on Blade Dhanuporn Aksorn-In, Chen Yali, Zhao Yang, Sun Zhongguo (2019), DOI: 10.33737/gpps19-bj-002
A Review of Computational Methods for Aeroelastic Instabilities of Multi-Stage Compressor Mehdi Vahdati, Fanzhou Zhao, Prathiban Sureshkumar (2019), DOI: 10.33737/gpps19-bj-014
Advanced Cycles & Performance
Thermodynamic Analysis of Various Combined {SOFC}-{SCO}2 Brayton Cycle System Layouts Liu Xia, Xuesong Li, Jian Song, Xiaodong Ren, Chunwei Gu (2019), DOI: 10.33737/gpps19-bj-098
Performance Simulation to Investigate the Impact of a Deteriorated High-Pressure Compressor on Turbofan Engine Using a Pseudo Bond Graph Modelling Approach Jan Göing, Sebastian Lück, Christoph Bode, Jens Friedrichs (2019), DOI: 10.33737/gpps19-bj-160
Thermodynamic Analysis and Optimization of a Supercritical Carbon Dioxide (S-CO2) Recompression Cycle coupled with a Bottoming Organic Rankine Cycle Aozheng Zhou, Xiaodong Ren, Xuesong Li, Chunwei Gu, Jian Song (2019), DOI: 10.33737/gpps19-bj-167
A Comparison of Steady-State Models for Pressure Gain Combustion in Gas Turbine Performance Simulation Nicolai Neumann, Dominik Woelki, Dieter Peitsch (2019), DOI: 10.33737/gpps19-bj-198
Development of a Flight Mission Model and its Application in Order to Illustrate the Influence of Variable Thrust Nozzles Tim Sauer, Tim Rückel, Dieter Peitsch (2019), DOI: 10.33737/gpps19-bj-217
Acoustics & Noise
Study on Thermal-acoustic-structural Performance of Aeroengine Combustor Based on Coupled-Field Technology Peng Guan, Yanting Ai and (2019), DOI: 10.33737/gpps19-bj-001
Parameter Investigation of Ring Microphone Array for Rotating Sound Source Localization Wei Zhou, Huan Bao, Mingsui Yang, Wei Ma (2019), DOI: 10.33737/gpps19-bj-007
A Physical Model of Flow-Induced Acoustic Resonance in a Duct Containing a Circular Cylinder Zhiliang Hong, Mingsui Yang (2019), DOI: 10.33737/gpps19-bj-028
Study on Sound Insulation Properties of Composite Laminated Structures Hanwen Zhao, Xingrong Huang, Jinliang Xu, Le Fang (2019), DOI: 10.33737/gpps19-bj-064
Control of Thermoacoustic Oscillation by Microsecond Plasma Discharges Mingxuan Zhang, Jingxuan Li, Wenwang Cheng, Ting Li (2019), DOI: 10.33737/gpps19-bj-114
A Meshless Model for Cavity Noise Prediction Based on Vortex Sound Method Zengze Yu, Zhiliang Hong (2019), DOI: 10.33737/gpps19-bj-116
CFD Modeling of a Realistic Turbofan Blade for Noise Prediction. Part 1: Aerodynamics Carlos Pérez Arroyo, Pavel Kholodov, Marlène Sanjosé, Stéphane Moreau (2019), DOI: 10.33737/gpps19-bj-126
An Analytical Method for a Rectangular Splitter Silencer Lingfeng Chen, Xiaoyu Wang, Lin Du Lin Du, Xiaofeng Sun (2019), DOI: 10.33737/gpps19-bj-180
CFD Modeling of a Realistic Turbofan Blade for Noise Prediction. Part 2: Analytical Acoustic Predictions Marlene Sanjosé, Pavel Kholodov, Carlos Pérez Arroyo, Stéphane Moreau (2019), DOI: 10.33737/gpps19-bj-224
Heat Transfer and Combustion
Modeling and Analysis Thin Wall Film Formation with Integrated Discrete and Continuous Phase Simulation Approach Peng Ke, Jie Liu (2019), DOI: 10.33737/gpps19-bj-016
Incremental Proper Orthogonal Decomposition Based Method for the Analyzation of Large Scale High Fidelity Simulation Results Qingsong Wang, Zhen Zhang, Xinrong Su, Xin Yuan (2019), DOI: 10.33737/gpps19-bj-026
Entropy Transportation Equation Based Loss Mechanism Analysis with High Fidelity Turbulence Simulation Results Hui Li, Xinrong Su, Xin Yuan (2019), DOI: 10.33737/gpps19-bj-032
An Advanced Method for Processing Compressor Model in Application of Performance Simulation Hao Dai, Theoklis Nikolaidis, Ju Luo (2019), DOI: 10.33737/gpps19-bj-049
Machine Learning Uncertainty Quantification of Spalart-Allmaras Turbulence Model for Compressors Xiao He, Fanzhou Zhao, Mehdi Vahdati (2019), DOI: 10.33737/gpps19-bj-050
KEPLER: An Integrated Simulating System for Efficient Industrial Design and Optimization Yi Lu, Kai Liu (2019), DOI: 10.33737/gpps19-bj-052
Flow Instability Prediction Via Eigenanalysis and its Application to Rotating Stall Shenren Xu, Chen He, Dakun Sun, Dingxi Wang (2019), DOI: 10.33737/gpps19-bj-083
On the Three-Dimensional Body Force Model Yinbo Mao, Thong Dang (2019), DOI: 10.33737/gpps19-bj-086
Real Gas Simulation for High-pressure and Low-pressure Nonequilibrium Condensation in Transonic Flows Takashi Furusawa, Shota Moriguchi, Hironori Miyazawa, Satoru Yamamoto (2019), DOI: 10.33737/gpps19-bj-093
Modelling Turbulent Transport Effects on the Formation Probability of Flame Kernel in Ignition Process Qing Xie, Zhuyin Ren, Ke Wang, Hongjun Lin, Shoutang Shang, Wei Xiao (2019), DOI: 10.33737/gpps19-bj-101
Immersed Boundary Method with Moving Half-Domain Body-Fitted Meshes For 3-D Compressible Viscous Flow Jingyuan Wang, Peng Shan, Haitao Zhu (2019), DOI: 10.33737/gpps19-bj-121
Robust Optimization for Vortex Generators in U-Bend Channel of High-Temperature Blades Zhendong Guo, Zhi Tao, Liming Song (2019), DOI: 10.33737/gpps19-bj-146
Towards a Peta-scale Unstructured Computational Fluid Dynamics (CFD) Acceleration Toolkit based on Sunway architectures? Hongbin Liu, Hu Ren, Chen Wang, Hanfeng Gu, Fei Gao, Guangwen Yang (2019), DOI: 10.33737/gpps19-bj-148
Evaluation of Spalart-Allmaras Model with Various Modifications for Predicting Corner Separation in a Compressor Cascade Wenhao Li, Yangwei Liu (2019), DOI: 10.33737/gpps19-bj-177
Investigation of the Unsteady Flow Features in a Tip Leakage Flow Model Using Large-Eddy Simulation Yanfei Gaog, Yangwei Liu and (2019), DOI: 10.33737/gpps19-bj-181
Development of a Correlation to Represent Non-uniform Blade Tip Gaps within a Compressor Performance Model Tim Sauer, Dieter Peitsch (2019), DOI: 10.33737/gpps19-bj-212
Turbulent Flow Simulation for a Sharp Immersed Boundary Method Congcong Chen, Lin Du, Xiaofeng Sun, Zhuo Wang (2019), DOI: 10.33737/gpps19-bj-215
Studies on Part Load Controlled Cooling Air Supplies in Stationary Gas Turbines Dominik Woelki, Dieter Peitsch, Jonas Foret, Louise Dittmar, Mustafa Kanik (2019), DOI: 10.33737/gpps19-bj-221
Controls
An Improved Threshold Determination Method Based on {PSO} Algorithm for Sensor Fault Diagnosis Yao Li, Hanling Xu, Chunyan Hu (2019), DOI: 10.33737/gpps19-bj-079
Output-Feedback Model Predictive Control of Non-Ideal-Gas Heat Exchangers Viv Bone, Thomas Reddell, Michael Kearney, Ingo Jan (2019), DOI: 10.33737/gpps19-bj-220
Combustor & Combustions
Ignition Failure Modes During Ignition Kernel Propagation in Swirl Spray Flame Xiaotong Mi, Chi Zhang, Xin Hui, Yuzhen Lin, Hukam Mongia, Kyle Twarog, Chih-Jen Sung (2019), DOI: 10.33737/gpps19-bj-047
Kinetic Modeling Study on the Emission Characteristics of an Axial-Fuel-Staged Model {MILD} Combustor Xianglong Zheng, Yan Xiong, Fulin Lei, Zhedian Zhang, Yunhan Xiao (2019), DOI: 10.33737/gpps19-bj-051
Laminar Flame Speed of Methane/Air at Engine-Relevant Conditions: Performance of Different Mechanisms Yiqing Wang, Jingyi Su, Zheng Chen (2019), DOI: 10.33737/gpps19-bj-059
Suppression of Combustion Instabilities in a Premixed Swirl Combustor with Acoustic Liner Liangliang Xu, Guoqing Wang, Xunchen Liu, Lei Li, Fei Qi, Xiaofeng Sun (2019), DOI: 10.33737/gpps19-bj-060
Numerical Analysis of Combustion Instability in Annular Combustion Chamber with Spatially Distributed Heat Release Rate Model Man Zhang, Rong Xu and (2019), DOI: 10.33737/gpps19-bj-072
Study an Acoustic-Intrinsic Thermoacoustic Feedback on Swirling Flame Combustors Yong Chen (2019), DOI: 10.33737/gpps19-bj-073
Rich-Lean Combustor for a 50kW class Micro Gas Turbine Firing Ammonia Norihiko Iki, Osamu Kurata, Takahiro Inoue, Takayuki Matsunuma, Taku Tsujimura, Hirohide Furutani, Masato Kawano, Keisuke Arai, Hideaki Kobayashi, Akihiro Akihiro Hayakawa, Ekenechukwu Okafor (2019), DOI: 10.33737/gpps19-bj-074
Investigation on the Flame Front and Flow Field in Acoustically Excited Swirling Flames with and without Confinement Guoqing Wang, Xunchen Liu, Lei Li, Fei Qi (2019), DOI: 10.33737/gpps19-bj-076
Single Droplet Ignition Models Based on Energy Balance Analysis and Validation Fang Wang, Zhaoyang Wu (2019), DOI: 10.33737/gpps19-bj-084
Theoretical Kinetics Study on the Reactions of 1,3-butadiene $mathplus$ {HO}2 Yuxiang Zhu, Chong-Wen Zhou, Jie Zhao, Zhiping Tao (2019), DOI: 10.33737/gpps19-bj-089
Kinetics of {OH} Radical Addition to 1,3-Butadiene and Related Reactions on the {.{C}}4H7O Potential Energy Surface Junfeng Bai, Chongwen Zhou, Jie Zhao, Zhiping Tao (2019), DOI: 10.33737/gpps19-bj-102
Imaging Diagnositics of Combustion Instability in Premixed Swirling Combustion Yao Yang, Gaofeng Wang, Yuanqi Fang, Yifan Xia, Liang Zhong (2019), DOI: 10.33737/gpps19-bj-104
Experimental Study of the Dynamic Responses of an Asymmetric Two-Dimensional Bunsen Flame Yichen Wang, Chunyan Li, Suhui Li, Min Zhu (2019), DOI: 10.33737/gpps19-bj-107
Large Eddy Simulations of an Annular Bluff-Body Burner Using the Modified Dynamic Thickened Flame Model Kaixing Wang, Fuqiang Liu, Haitao Lu, Jinhu Yang, Xiongjie Fan, Gang Xu (2019), DOI: 10.33737/gpps19-bj-129
Soot Morphological Differences between Laminar Diffusion Flames of Traditional Aviation Kerosene and Bio-kerosene Yiyang Yang, Zhiwen Gan (2019), DOI: 10.33737/gpps19-bj-131
Development of Laser Induced Fluorescence Focusing Schlieren system ({LIF}-{FS}) and its application in a scramjet combustor Ruixu Zhou, Huan Lian, Xinyu Chang (2019), DOI: 10.33737/gpps19-bj-139
Modeling of Jet Fuel Spray Impingement in a Wind Tunnel Songyang Li, Zhengjun Wang, Yuyang Li, Pengfei Zou, Tianyu Li (2019), DOI: 10.33737/gpps19-bj-143
Very-Large Eddy Simulation of Complex Turbulent Flame Based on {FGM} Xingsi Han, Pengxiang Wan, Junkui Mao (2019), DOI: 10.33737/gpps19-bj-166
Extinction and Re-Ignition Predictions Using Eddy Dissipation Concept and Flamelet Generated Manifold Models for a Premixed Piloted Turbulent Jet Burner Hossam Elasrag, Ishan Verma, Chitral Naik, Shaoping Li, Ellen Meeks (2019), DOI: 10.33737/gpps19-bj-191
Experimental Investigation and Assessment of Combustion Instability and Engine Vibrations$mathsemicolon$ as an Impact of Using Novel Alternative Fuels with Low Aromatics in a Gas Turbine Engine Charith Wijesinghe, Yuxiao Ling, Bhupendra Khandelwal (2019), DOI: 10.33737/gpps19-bj-195
Effects of Perforated Liners on Controlling Combustion Instability in an Annular Combustor Guangyu Zhang, Xiaoyu Wang, Xiaofeng Sun (2019), DOI: 10.33737/gpps19-bj-200
Cooling Technology
Investigation of Film Cooling Vortical Structures Behind a Cylindrical Hole Fed by an Internal Crossflow Mohamed Qenawy, Wenwu Zhou, Di Peng, Yingzheng Liu (2019), DOI: 10.33737/gpps19-bj-017
Experimental Study on Spatio-Temporal Variation of Double-Row Holes Film Cooling Effectiveness with Oscillating Mainstream Han Chen, Wenwu Zhou, Mohamed Qenawy, Yingzheng Liu (2019), DOI: 10.33737/gpps19-bj-018
Influence of Mainstream Oscillations on the Spatio-temporal Variations of Leading-edge Film Cooling Effectiveness Hongyi Shao, Han Chen, Wenwu Zhou, Di Peng, Yingzheng Liu (2019), DOI: 10.33737/gpps19-bj-020
Design Optimization
Study on Aerodynamic Performance and Optimization Design of a Turbine in Liquid Rocket Engine Wenhao Zhang, Kaifu Xu, Zhiduo Wang, Pengfei Zhang, Zhong Ren, Liming Song, Zhenping Feng (2019), DOI: 10.33737/gpps19-bj-117
Fundamental Studies
Experimental Investigations of Effects of Venturi Angle on the Spray Structure Xiongjie Fan, Cunxi Liu, Yulan Wang, Kaixing Wang, Qingbei Qiao, Gang Xu (2019), DOI: 10.33737/gpps19-bj-090
Operation Process and Response Characteristics of the Wind Turbines Under Complex Terrain Using a Multi-scale Coupling Model Qiang Wang, Kun Luo, Chunlei Wu, Jianren Fan (2019), DOI: 10.33737/gpps19-bj-214
Heat Transfer
Enhanced Heat Transfer of Jet Impingement Nozzle with Piezoelectric Fan Wenwu Zhou, Yingzheng Liu (2019), DOI: 10.33737/gpps19-bj-019
A Numerical Simulation of Rotating Channel with a V Rib-Dimple Hybrid Structure Peng Zhang, Yu Rao (2019), DOI: 10.33737/gpps19-bj-031
Numerical Study of Buoyancy-Driven Flow in a Closed Rotating Annulus John W Chew, Diogo Berta Pitz (2019), DOI: 10.33737/gpps19-bj-034
Analysis of Flow Characteristics and Overall Cooling Effectiveness of Ultra-high Impingement Distance Heat Shield Long Xie, Jianjun Zhou, Cunliang Liu (2019), DOI: 10.33737/gpps19-bj-109
Taylor-Couette-Poiseuille Flow Heat Transfer in a High Taylor Number Test Rig Ingo Jahn, Hugh Russell (2019), DOI: 10.33737/gpps19-bj-149
Numerical Simulation of the Effect of Inlet Entropy Wave on the Flow Characteristics and Wall Heat Transfer on a Turbine Guide Vane Keqi Hu, Yifan Xia, Yao Zheng, Stéphane Moreau, Gaofeng Wang (2019), DOI: 10.33737/gpps19-bj-103
Effects of Different Vortex Generators on the Impingement Heat Transfer for the Turbine Blade Leading Edge Cooling Liangliang Liu, Xiaocheng Zhu, Zhaohui Du, Daiwei Zhou, Chong Sun (2019), DOI: 10.33737/gpps19-bj-045
Calibrated Low-Order Transient Thermal and Flow Models for Robust Test Facility Design Thomas Povey, Andrew Messenger (2019), DOI: 10.33737/gpps19-bj-206
Instrumentation & Testing
Variable Blade Tip Geometry Inserts for Combined Aerothermal Measurements for Bladed Disk Rotors Dominic D. Hänni, Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari (2019), DOI: 10.33737/gpps19-bj-013
Influence of Probe Measuring Positions on Aerodynamics of a Transonic Axial flow Compressor Hongwei Ma, Asad Islam (2019), DOI: 10.33737/gpps19-bj-053
Pre-positioning of Optical Components for Pressure Sensitive Paint Measurement Using Prior Ray-tracing Method Tianyu Gao, Limin Gao, Guanhua Yang, Tianlong Zheng, Ning Ge (2019), DOI: 10.33737/gpps19-bj-069
Compressor Rig Test Facility in Shanghai Jiao Tong University Yadong Wu, Zeyuan Yang, Chao Sun, Hua Ouyang (2019), DOI: 10.33737/gpps19-bj-147
Experimental Research on 3D Particle Tracking Velocimetry Based on Light Field Imaging Huifang Liu, Wu Zhou, Xiaoshu Cai, Tianlei Qian, Fan Wu (2019), DOI: 10.33737/gpps19-bj-219
Methodology for High-Accuracy Infrared Calibration in Environment with Through-Wall Heat Flux Mathias Michaud, Francesco Ornano, Nafiz Chowdhury, Thomas Povey (2019), DOI: 10.33737/gpps19-bj-229
Evaluation and Validation of PSP and TSP Measurement Techniques in Turbomachinery Applications Yongzeng Li, Di Peng, Yingzheng Liu, Satoshi Oouchida, Tomoki Kawakubo, Akimitsu Yakushiji (2019), DOI: 10.33737/gpps19-bj-077
Monitor & Diagnostics
Performance Calculation of a Multi-Stage Axial Compressor through a Semi-Empirical Modelling Framework Samuel Cruz-Manzo, Senthil Krishnababu, Vili Panov, Yu Zhang (2019), DOI: 10.33737/gpps19-bj-123
Piezoelectric Wave-mode Transducers for Structural Health Monitoring of Joint Structures in Cylinders Lin Li, Wenjun Wang, Yu Fan (2019), DOI: 10.33737/gpps19-bj-161
Research on Fault Diagnosis Method of Bearing Based on Image Transformation of Time Series Chuanchao Xu, Yue Liu, Jinglun Fu (2019), DOI: 10.33737/gpps19-bj-164
Flow Instabilities Detection in Centrifugal Blower Using Empirical Mode Decomposition Mateusz Stajuda, Grzegorz Liskiewicz, David Garcia (2019), DOI: 10.33737/gpps19-bj-222
Radial Compressors
Experimental Research on Rotating Stall Induced Blade Vibration in an Unshrouded Centrifugal Compressor Hongkun Li, Shuhua Yang, Zhenfang Fan (2019), DOI: 10.33737/gpps19-bj-163
Numerical Investigations on Aerodynamic Blockage Characteristics and Exit Blockage Prediction Model for Transonic Centrifugal Impellers Xuezhi Dong, Xiyang Liu, Qing Gao, Chunqing Tan (2019), DOI: 10.33737/gpps19-bj-173
Dynamic Model for the Simulation of Surge in a Centrifugal Compression System with Vaned Diffuser Zhiheng Wang, Pengfei Zhang, Guang Xi, Zhiheng Wang (2019), DOI: 10.33737/gpps19-bj-156
Structural Dynamics & Aeromechanics
The Nonlinear Dynamics of a Rod-fastened Rotor Qi Da, Qi Yuan, Pu Li, Yang Liu (2019), DOI: 10.33737/gpps19-bj-024
Seal & Secondary Flow
Effect of the Fence Height on the Leakage Flow Characteristics of Brush Seals Yuanqiao Zhang, Dengqian Ma, Jun Li, Yuan He, Jingjin Ji, Bo Sun, Zhigang Li, Xin Yan (2019), DOI: 10.33737/gpps19-bj-021
The Effect of Hole Geometry on Discharge Coefficient of Rotating Axial Holes Under Pre-Swirl Conditions Ruonan Wang, Guang Liu, Qiang Du, Zengyan Lian, Lei Xie (2019), DOI: 10.33737/gpps19-bj-054
An Improved Control Method of Rim Seal Based on Auxiliary Sealing Holes Ruonan Wang, Guang Liu, Zengyan Lian, Qiang Du, Lei Xie (2019), DOI: 10.33737/gpps19-bj-096
Investigation of a Novel pressure-Actuated Brush Seal under Hot Steam Conditions Philip Reggentin, Jens Friedrichs, Johan Flegler, Ivan McBean (2019), DOI: 10.33737/gpps19-bj-119
The Sealing Efficiency and Interaction between Purge Flow and Mainstream Flow for Novel Rim Seal Configurations Ziqing Zhang, Wencan Tao, Yukuan Song, Zhijun Lei, Yanfeng Zhang (2019), DOI: 10.33737/gpps19-bj-175
Turbines
Shock-Vortex Interaction in a Transonic Turbine Cascade Dajan Mimic, Marcel Oettinger, Philipp Sauer, Florian Herbst (2019), DOI: 10.33737/gpps19-bj-008
Bearing and Seal Selection for a High-Temperature Supercritical {CO}2 Turbine Hal Gurgenci, Jishun Li, Zhiqiang Guan (2019), DOI: 10.33737/gpps19-bj-040
Automated 2D Airfoil Optimization of Intentionally Choked Blades Eduard Braining (2019), DOI: 10.33737/gpps19-bj-067
The Effect of Ash Deposition on a Transonic Turbine Guide Vane Yun Zheng, Dong Sun, Hui Yang (2019), DOI: 10.33737/gpps19-bj-068
Aerothermal Investigation of Transonic Over-Tip Leakage Flow with Cooling Injection for Different Tip Geometries Mingxing Tang, Shaopeng Lu, Jinfang Teng (2019), DOI: 10.33737/gpps19-bj-071
Aero-thermal Performance of Coolant Released from Suction Surface in a High-Pressure Turbine Cascade Zuhao Liu, Chao Zhou, Kai Zhou (2019), DOI: 10.33737/gpps19-bj-081
Effects of Geometric Parameters and Inflow Conditions on Flow in Aggressive Inter-Turbine Ducts Yumo Mu, Weihao Zhang, Yanmei Mei (2019), DOI: 10.33737/gpps19-bj-091
Aerodynamic Performance Analysis of the Transonic Turbine with Tip Clearance Variations for Marine Turbochargers Guojun Ma, Jiaxing Chai, Jie Gao, Guoqiang Yue, Qun Zheng (2019), DOI: 10.33737/gpps19-bj-110
Optimized Design of the Volute Between Turbine and Regenerator in Micro Gas Turbine Li Yaoyang, Zhang Hualiang, Yin Zhao, Wang Shaolin, Tan Chunqing (2019), DOI: 10.33737/gpps19-bj-182
Effects of Squealer Tip Geometry Deviation on Flow Field and Aerodynamic Performance Using Uncertainty Quantification Method and Sensitivity Analysis Method Wei Shi, Pingting Chen, Xueying Li, Jing Ren, Hongde Jiang (2019), DOI: 10.33737/gpps19-bj-203
Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine Marcel Oettinger, Dajan Mimic, Michael Henke, Oleg Schmunk, Joerg R. Seume (2019), DOI: 10.33737/gpps19-bj-207
Influence of Meridian Flow Path and Loading Distribution on the Performance of Turbine Rear Frame Shulei Li, Donghai Jin, Xinmin Gui, Jinwei Li (2019), DOI: 10.33737/gpps19-bj-232
Unsteady Flows
Non-equilibrium Turbulent Phenomena in a Transitional Flat Plate Boundary Layer Feng Liu, Le Fang, Lipeng Lu, Jian Fang, Qun Cao (2019), DOI: 10.33737/gpps19-bj-057
Investigation of Numerical Analysis of Blade Row Interaction Unsteady Flows within Multi-row Turbomachines Using the Time Spectral Method Sen Zhang, Dingxi Wang, Xiuquan Huang (2019), DOI: 10.33737/gpps19-bj-162
Solution Stabilization and Convergence Speedup forNonlinear Frequency Domain Equation System Using a Time-Space Multigrid Method Hangkong Wu, Dingxi Wang, Xiuquan Huang (2019), DOI: 10.33737/gpps19-bj-197
