GPPS Journal Volumes

The Journal is devoted to the advancement of the science and technology of power generation and propulsion systems through the dissemination of original archival papers contributing to advancements in turbomachinery based technologies.

  1. Loss Assessment of the Axial-Gap Size Effect in a Low-Pressure Turbine

    Marcel Oettinger, Dajan Mimic, Michael Henke, Oleg Schmunk, Jorg Seume (2021), DOI: 10.33737/jgpps/127834, PP. 1-14

    Download Paper


  2. The required aerodynamic simulation fidelity to usefully support a gas turbine Digital Twin for manufacturing

    Wen Yao Lee, William Dawes, John Coull (2021), DOI: 10.33737/jgpps/132007, PP. 15-27

    Download Paper


  3. Investigation of the tip injection for stall control in a transonic compressor with inlet distortion

    Wenqiang Zhang, Mehdi Vahdati (2021), DOI: 10.33737/jgpps/132006, PP. 28-38

    Download Paper


  4. Aerodynamic investigation of a linear cascade with tip gap using large-eddy simulation

    Koch Régis, Sanjosé Marlène, Moreau Stéphane (2021), DOI: doi.org/10.33737/jgpps/133601, PP. 39–49

    Download Paper


  5. Improvement of corner separation prediction using an explicit non-linear RANS closure

    Wei Sun, Liping Xu (2021), DOI: doi.org/10.33737/jgpps/133913, PP. 50–65

    Download Paper


  6. Sensitivity analysis on the impact of geometrical and operational variations on turbine hub cavity modes and practical methods to control them

    Vahid Iranidokht, Anestis Kalfas, Reza Abhari, Shigeki Senoo, Kazuhiro Momma (2021), DOI: 10.33737/jgpps/133736, PP. 66–78

    Download Paper


  7. Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove

    Ahmad Fikri Mustaffa, Vasudevan Kanjirakkad (2021), DOI: 10.33737/jgpps/133912, PP. 79–89

    Download Paper


  1. Methodology for High-Accuracy Infrared Calibration in Environments with Through-Wall Heat Flux

    Mathias Michaud, Francesco Ornano, Nafiz Chowdhury, Thomas Povey (2020), DOI: 10.33737/jgpps/118091, PP. 1-13

    Download Paper


  2. An Analytical Approach to Estimate the Effect of Surface Roughness on Particle Rebound

    Johannes Altmeppen, Heike Sommerfeld, Christian Koch, Stephan Staudacher (2020), DOI: 10.33737/jgpps/118624, PP. 27-37

    Download Paper


  3. Hybrid electric powertrain for long-haul trucks and buses: preliminary analysis of a new concept based on a combined cycle power plant

    Sebastian Bahamonde Noriega, Carlo De Servi, Piero Colonna (2020), DOI: 10.33737/jgpps/118979, PP. 63-79

    Download Paper


  4. Imaging diagnostics of combustion instability in premixed swirling combustion

    Yao Yang, Gaofeng Wang, Yuanqi Fang, YIfan Xia, Liang Zhong (2020), DOI: 10.33737/jgpps/120536, PP. 80-93

    Download Paper


  5. Calibrated Low-Order Transient Thermal and Flow Models for Robust Test Facility Design

    Andrew Messenger, Thomas Povey (2020), DOI: 10.33737/jgpps/122270, PP. 94-113

    Download Paper


  6. An overview of time-domain computational methods for aeroelastic instabilities of multi-stage compressors

    Mehdi Vahdati, Fanzhou Zhao, Prathiban Sureshkumar (2020), DOI: 10.33737/jgpps/123916, PP. 114-127

    Download Paper


  7. Experimental evaluation of performance and mechanical reliability for high pressure CO2 integrally geared compressor

    Toshiaki Baba, Koumei Fujioka, Hirotoshi Arihara, Yoshitaka Baba, Takuya Iwata (2020), DOI: 10.33737/jgpps/124724, PP. 128-144

    Download Paper


  8. A Novel MEMS-Based Probe for Unsteady Aerodynamic Measurements: A Proof-of-Concept Study

    William Morris, John Coull, Tony Dickens, Andrea de Luca, Florin Udrea (2020), DOI: 10.33737/jgpps/124489, PP. 145-160

    Download Paper


  9. Canonical Validation of a Modeling Strategy for Carbon Monoxide Emissions in Staged Operation of Gas Turbine Combustors

    Noah Klarmann, Thomas Sattelmayer (2020), DOI: 10.33737/jgpps/127716, PP. 161-175

    Download Paper


  10. Turbine Map Extension - Theoretical Considerations and Practical Advice

    Kurzke Joachim (2020), DOI: 10.33737/jgpps/128465, PP. 176-189

    Download Paper


  11. Generation Mechanism of Diffuser Stall in a Centrifugal Compressor with Vaneless Diffuser

    Nobumichi Fujisawa, Kenta Tajima, Hiroshi Miida, Yutaka Ohta (2020), DOI: 10.33737/jgpps/128974, PP. 190-201

    Download Paper


  12. Experimental Evaluation of Using Silica Aerogels as the Thermal Insulator for Combustor Liners

    Yeongmin Pyo, Taylor Robertson, Sean Yun, Zekai Hong (2020), DOI: 10.33737/jgpps/129703, PP. 202-216

    Download Paper


  13. Impact of downstream potential perturbations on the nonlinear stability of a generic fan

    David Romera, Roque Corral (2020), DOI: 10.33737/jgpps/130028, PP. 217-225

    Download Paper


  14. Low pressure ratio transonic fan stall with radial distortion

    Tim Williams, Cesare Hall, Mark Wilson (2020), DOI: 10.33737/jgpps/130478, PP. 226-237

    Download Paper


  15. Influence of Different Gases on the Design Point of an Industrial Axial Compressor and Deduced Aerodynamical Rematching Methodology

    Henrik Hoffmann, Lukas Stuhldreier, Ruben van Rennings, Peter Jeschke (2020), DOI: 10.33737/jgpps/130033, PP. 238-252

    Download Paper


  16. Assessment of the washing effectiveness of on-purpose designed eco-friendly cleaner against soot deposits

    Nicola Casari, Michele Pinelli, Alessio Suman, Alessandro Vulpio, Craig Appleby, Simon Kyte (2020), DOI: 10.33737/jgpps/130789, PP. 253-263

    Download Paper


  17. Numerical Investigation of a High Momentum Jet Flame at Elevated Pressure: A Quantitative Validation with Detailed Experimental Data

    Michael Pries, Andreas Fiolitakis, Peter Gerlinger (2020), DOI: 10.33737/jgpps/130031, PP. 264-273

    Download Paper


  18. Three-dimensional low-order surge model for high-speed axial compressors

    Mauro Righi, Vassilios Pachidis, László Könözsy, Fanzhou Zhao, Mehdi Vahdati (2020), DOI: https://doi.org/10.33737/jgpps/130790, PP. 274–284

    Download Paper


  19. Influence of blade vibration on part-span rotating stall

    Fanzhou Zhao, John Dodds, Mehdi Vahdati (2020), DOI: 10.33737/jgpps/130873, PP. 285-295

    Download Paper


  20. Influence of combined compressor and turbine deterioration on the overall performance of a jet engine using {RANS} simulation and Pseudo Bond Graph approach

    Jan Goeing, Hendrik Seehausen, Vladislav Pak, Sebastian Lueck, Joerg R. Seume, Jens Friedrichs (2020), DOI: 10.33737/jgpps/131109, PP. 296-308

    Download Paper


  21. Large-Eddy Simulations of Rim Seal Flow in a One-Stage Axial Turbine

    Thomas Hösgen, Matthias Meinke, Wolfgang Schröder (2020), DOI: 10.33737/jgpps/129704, PP. 309-321

    Download Paper


  22. Investigation of jet engine intake distortions caused by crosswind conditions

    Lennart Harjes, Christoph Bode, Jonas Grubert, Philip Frantzheld, Patrick Koch, Jens Friedrichs (2020), DOI: 10.33737/jgpps/118875, PP. 48-62

    Download Paper


  23. Investigation of a novel pressure - actuated brush seal under hot steam conditions

    Philip Reggentin, Jens Friedrichs, Johan Flegler, Ivan McBean (2020), DOI: 10.33737/jgpps/117858, PP. 14-26

    Download Paper


  24. Planar LIF/MIE ratio droplet sizing using structured laser sheet imaging at elevated ambient pressures

    Andrew Corber, Wajid Chishty, Patrizio Vena (2020), DOI: 10.33737/jgpps/115249, PP. 38-47

    Download Paper


  1. The sensitivity of turbine cascade endwall loss to inlet boundary layer thickness

    John Coull, Christopher Clark, Raul Vazquez (2019), DOI: 10.22261/jgpps.oeymde, PP. 540–554

    Download Paper


  2. Purge flow effects on rotor hub endwall heat transfer with extended endwall contouring into the disk cavity

    Dominic Hänni, Rainer Schädler, Reza Abhari, Anestis Kalfas, Gregor Schmid, Ewald Lutum, Nicolas Lecoq (2019), DOI: 10.33737/jgpps/109838, PP. 555-568

    Download Paper


  3. Parametric study on the aeroelastic stability of rotor seals

    Qingyuan Zhuang, Ronnie Bladh, Erik Munktell, Yong Lee (2019), DOI: 10.33737/jgpps/110751, PP. 569-579

    Download Paper


  4. Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades

    Marlene Böttger, Martin Lange, Ronald Mailach, Konrad Vogeler (2019), DOI: 10.33737/jgpps/110621, PP. 580-591

    Download Paper


  5. Thermal Energy Storage For Gas Turbine Power Augmentation

    Vasilis Gkoutzamanis, Anastasia Chatziangelidou, Theofilos Efstathiadis, Anestis Kalfas, Alberto Traverso, Justin Chiu (2019), DOI: 10.33737/jgpps/110254, PP. 592-608

    Download Paper


  6. Effects of Stator Platform Geometry Features on Blade Row Performance

    Derek Taylor, John Longley (2019), DOI: 10.33737/jgpps/111508, PP. 609-629

    Download Paper


  7. Superior fuel and operational flexibility of sequential combustion in Ansaldo Energia gas turbines

    Andrea Ciani, Mirko Bothien, Birute Bunkute, John Wood, Gerhard Früchtel (2019), DOI: 10.33737/jgpps/110717, PP. 630-638

    Download Paper


  8. Influence of Blade Aspect Ratio on Axial Compressor Efficiency

    Markus Peters, Tobias Schmidt, Peter Jeschke (2019), DOI: 10.33737/jgpps/111735, PP. 639-652

    Download Paper


  9. Noise characteristics of a reduced blade count rotor with improved stage efficiency

    Rainer Schädler, Dominic Hänni, Anestis Kalfas, Reza Abhari, Gregor Schmid, Ewald Lutum, Carsten Schneider (2019), DOI: 10.33737/jgpps/112303, PP. 653-667

    Download Paper


  10. Optimization of compressor stations

    Kurz Rainer (2019), DOI: 10.33737/jgpps/112399, PP. 668-674

    Download Paper


  11. Influence of HTC levels on temperature and stress levels in a leading edge impingement system

    Robert Pearce, Peter Ireland, Edwin Dane (2019), DOI: 10.22261/jgpps.wlal1f, PP. 529–539

    Download Paper


  1. Streamlined frameworks for advancing metal based additive manufacturing technologies

    Wentao Fu, Christoph Haberland, Eva Verena Klapdor, David Rule, Sebastian Piegert (2018), DOI: 10.22261/jgpps.qjls4l, PP. 317–328

    Download Paper


  2. The sensitivity of 3D separations in multi-stage compressors

    Kiran Auchoybur, Robert Miller (2018), DOI: 10.22261/jgpps.34c05t, PP. 329–343

    Download Paper


  3. Accelerated thermal profiling of gas turbine components using luminescent thermal history paints

    Silvia Araguás Rodríguez, Tomáš Jelínek, Jan Michálek, Álvaro Yáñez González, Fiona Schulte, Christopher Pilgrim, Jorg Feist, Stephen J. Skinner (2018), DOI: https://doi.org/10.22261/JGPPS.S3KTGK, PP. 344–361

    Download Paper


  4. A novel 4-sensor fast-response aerodynamic probe for non-isotropic turbulence measurement in turbomachinery flows

    Alexandros C. Chasoglou, Michel Mansour, Anestis I. Kalfas, Reza S. Abhari (2018), DOI: 10.22261/jgpps.uals07, PP. 362–375

    Download Paper


  5. Numerical modeling of co-emissions for gas turbine combustors operating at part-load conditions

    Noah Klarmann, Benjamin Timo Zoller, Thomas Sattelmayer (2018), DOI: 10.22261/jgpps.c3n5oa, PP. 376–387

    Download Paper


  6. Correlation between total pressure losses of highly loaded annular diffusers and integral stage design parameters

    Dajan Mimic, Christoph Jätz, Florian Herbst (2018), DOI: 10.22261/jgpps.i9ab30, PP. 388–401

    Download Paper


  7. Sweeping jet impingement heat transfer on a simulated turbine vane leading edge

    Mohammad A. Hossain, Lucas Agricola, Ali Ameri, James W. Gregory, Jeffrey P. Bons (2018), DOI: 10.22261/jgpps.5a7oaz, PP. 402–414

    Download Paper


  8. Experimental and numerical investigation of blade resonance in a centrifugal compressor for varying gas properties

    Degendorfer Carsten, Reza S. Abhari, Klemens Vogel, René Hunziker (2018), DOI: https://doi.org/10.22261/JGPPS.Q15CRP, PP. 415–428

    Download Paper


  9. Influence of blade geometry on secondary flow development in a transonic centrifugal compressor

    Moritz Mosdzien, Martin Enneking, Alexander Hehn, Daniel Grates, Peter Jeschke (2018), DOI: 10.22261/jgpps.i1rsj3, PP. 429–441

    Download Paper


  10. Numerical simulations of an intake-compressor system

    Thomas Kächele, Rudolf P. M. Rademakers, Tim Schneider, Reinhard Niehuis (2018), DOI: 10.22261/jgpps.vqb6ck, PP. 442–452

    Download Paper


  11. On the challenge of five-hole-probe measurements at high subsonic Mach numbers in the wake of transonic turbine cascades

    Marcel Boerner, Martin Bitter, Reinhard Niehuis (2018), DOI: 10.22261/jgpps.jprqqm, PP. 453–464

    Download Paper


  12. Deterioration effects of coupled blisk blades

    Andreas Kellersmann, Gerald Reitz, Jens Friedrichs (2018), DOI: 10.22261/jgpps.ckb8n6, PP. 465–476

    Download Paper


  13. Aeroelastic assessment of a highly loaded high pressure compressor exposed to pressure gain combustion disturbances

    Victor Bicalho Civinelli de Almeida, Dieter Peitsch (2018), DOI: 10.22261/jgpps.f72ouu, PP. 477–492

    Download Paper


  14. Evaluation of ultra-high bypass ratio engines for an over-wing aircraft configuration

    Daniel Giesecke, Marcel Lehmler, Jens Friedrichs, Jason Blinstrub, Lothar Bertsch, Wolfgang Heinze (2018), DOI: 10.22261/jgpps.8shp7k, PP. 493–515

    Download Paper


  15. Design optimization of a multi-stage axial compressor using throughflow and a database of optimal airfoils

    Markus Schnoes, Christian Vo{ss}, Eberhard Nicke (2018), DOI: 10.22261/jgpps.w5n91i, PP. 516–528

    Download Paper


  1. On the choice of contact parameters for the forced response calculation of a bladed disk with underplatform dampers

    Emanuele Grossi, Teresa Maria Berruti (2017), DOI: https://doi.org/10.22261/JGPPS.5D19RH, PP. 1–15

    Download Paper


  2. Operational and financial performance of fossil fuel power plants within a high renewable energy mix

    Patrick Eser, Ndaona Chokani, Reza S. Abhari (2017), DOI: doi.org/10.22261/JGPPS.2BIOTO, PP. 16–27

    Download Paper


  3. Gas turbine advanced power systems to improve SOFC economic viability

    Valentina Zaccaria, David Tucker, Alberto Traverso (2017), DOI: https://doi.org/10.22261/JGPPS.U96IED, PP. 28–40

    Download Paper


  4. Tip gap size effects on thermal performance of cavity-winglet tips in transonic turbine cascade with endwall motion

    Fangpan Zhong, Chao Zhou (2017), DOI: https://doi.org/10.22261/JGPPS.CR5JBC, PP. 41–54

    Download Paper


  5. Improvement of the turn-down ratio of gas turbines by autothermal on board syngas generation

    Max Herbert Baumgärtner, Thomas Sattelmayer (2017), DOI: https://doi.org/10.22261/JGPPS.D0HPA5, PP. 55–70

    Download Paper


  6. Estimation accuracy vs. engineering significance of contact parameters for solid dampers

    Chiara Gastaldi, Muzio M Gola (2017), DOI: https://doi.org/10.22261/JGPPS.VLXC9F, PP. 71–83

    Download Paper


  7. Prediction of the windage heating effect in steam turbine labyrinth seals

    Simon Hecker, Andreas Penkner, Jens Pfeiffer, Stefan Glos, Christian Musch (2017), DOI: https://doi.org/10.22261/JGPPS.ETJLRM, PP. 84–94

    Download Paper


  8. Unsteady flow mechanisms in the last stage of a transonic low pressure steam turbine - multistage effects and tip leakage flows

    Ilias Papagiannis, Asad Raheem, Altug Basol, Anestis Kalfas, Reza Abhari, Hisataka Fukushima, Shigeki Senoo (2017), DOI: https://doi.org/10.22261/JGPPS.F4IW8S, PP. 95–112

    Download Paper


  9. Novel high-pressure turbine purge control features for increased stage efficiency

    Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari, Gregor Schmid, Tilman auf dem Kampe, Sanjay B. Prabhu (2017), DOI: https://doi.org/10.22261/JGPPS.68MK5V, PP. 113–128

    Download Paper


  10. Application of a three-step approach for prediction of combustion instabilities in industrial gas turbine burners

    Dmytro Iurashev, Giovanni Campa, Vyacheslav Anisimov, Ezio Cosatto, Luca Rofi, Edoardo Bertolotto (2017), DOI: https://doi.org/10.22261/JGPPS.JCW78T, PP. 129–141

    Download Paper


  11. Assessment of turbulence model predictions for a centrifugal compressor simulation

    Lee Gibson, Lee Galloway, Sung in Kim, Stephen Spence (2017), DOI: https://doi.org/10.22261/JGPPS.2II890, PP. 142–156

    Download Paper


  12. Assessment of turbulence model predictions for a centrifugal compressor simulation

    Junho Kim, Seung Jin Song (2017), DOI: https://doi.org/10.22261/JGPPS.2II890, PP. 142–156

    Download Paper


  13. Measurement of thermal parameter and Reynolds number effects on cavitation instability onset in a turbopump inducer

    Junho Kim, Seung Jin Song (2017), DOI: https://doi.org/10.22261/JGPPS.H5DYU3, PP. 157–170

    Download Paper


  14. Numerical method for an assessment of steady and motion-excited flowfields in a transonic cascade wind tunnel

    Atsushi Tateishi, Toshinori Watanabe, Takehiro Himeno, Seiji Uzawa (2017), DOI: https://doi.org/10.22261/JGPPS.QL9XVI, PP. 171–183

    Download Paper


  15. Staged combustion concept for gas turbines

    Dieter Winkler, Weiqun Geng, Geoffrey Engelbrecht, Peter Stuber, Klaus Knapp, Timothy Griffin (2017), DOI: https://doi.org/10.22261/JGPPS.CVLCX0, PP. 184–194

    Download Paper


  16. Benchmarking data from the experience gained in engine performance and emissions testing on alternative fuels for aviation

    Tak Chan, Wajid A. Chishty, Pervez Canteenwalla, Craig R. Davison, Jennifer Chalmers (2017), DOI: https://doi.org/10.22261/JGPPS.S5WGLD, PP. 195–210

    Download Paper


  17. Effect of purge air on rotor endwall heat transfer of an axial turbine

    Sebastiano Lazzi Gazzini, Rainer Schädler, Anestis I. Kalfas, Reza S. Abhari, Sebastian Hohenstein, Gregor Schmid, Ewald Lutum (2017), DOI: https://doi.org/10.22261/JGPPS.F29ZWY, PP. 211–223

    Download Paper


  18. The effect of volute surface roughness on the performance of automotive turbocharger turbines

    Andreas Lintz (2017), DOI: https://doi.org/10.22261/JGPPS.3FLVC0, PP. 224–236

    Download Paper


  19. Fully turbulent discrete adjoint solver for non-ideal compressible flow applications

    Salvatore Vitale, Tim Adrian Albring, Matteo Pini, Nicolas Ralph Gauger, Piero Colonna (2017), DOI: https://doi.org/10.22261/JGPPS.Z1FVOI, PP. 252–270

    Download Paper


  20. Unsteady behaviours of a volute in turbocharger turbine under pulsating conditions

    Mingyang Yang, Ricardo F Martinez-Botas, Srithar Rajoo, Seiichi Ibaraki, Takao Yokoyama, Kangyao Deng (2017), DOI: https://doi.org/10.22261/JGPPS.3IOUWM, PP. 237–251

    Download Paper


  21. Turbine blade tip aero-thermal management: Some recent advances and research outlook

    Qiang Zhang, L He (2017), DOI: https://doi.org/10.22261/JGPPS.K7ADQC, PP. 271–287

    Download Paper


  22. Pressure gain combustion advantage in land-based electric power generation

    Seyfettin Gulen (2017), DOI: https://doi.org/10.22261/JGPPS.K4MD26, PP. 288–302

    Download Paper


  23. PIV measurements of the transient flow structure in the tip region of a transonic compressor near stability limit

    Christoph Brandstetter, Heinz-Peter Schiffer (2017), DOI: https://doi.org/10.22261/JGPPS.JYVUQD, PP. 303–316

    Download Paper


Our location

With team members spread across the globe, the core team is based in Zurich Switzerland.

m

Landis + Gyr-Strasse 1, 6300 Zug